Extron electronic GSS 100 manual GSS Response to Ping Request

Page 36

4.Click Start > Run... to activate the Run window. Type Cmd in the Run window and click OK to access the MS-DOS command prompt.

5.Enter the ARP -scommand with the desired new IP address (obtained from the system administrator) and the MAC address of the GSS (from the label on the rear panel of the GSS), as follows:

C:\> arp -s 10.13.170.15 00-05-A6-00-0A-90 <Enter>

 

 

 

 

 

 

 

 

 

Prompt Command

 

Desired

 

MAC address

Enter

 

 

 

 

IP address

 

 

 

key

6.Execute a ping command using the new IP address of the GSS as follows:

C:\> ping 10.13.170.15 <Enter>

After you send this command, the GSS changes to to the new address and starts responding to the ping requests (see figure 17). The IP address of the GSS is updated to the new address and you can reconnect using either Telnet or the web to verify that the update was successful.

C:\>ping 10.13.170.15

Pinging 10.13.170.15 with 32 bytes of data:

Reply from 10.13.170.15: bytes=32 time<10ms TTL=128

Reply from 10.13.170.15: bytes=32 time<10ms TTL=128

Reply from 10.13.170.15: bytes=32 time<10ms TTL=128

Reply from 10.13.170.15: bytes=32 time<10ms TTL=128

Ping statistics for 10.13.170.15:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

Figure 17. GSS Response to Ping Request

7.After the GSS responds to the ping command, issue the arp -dcommand at the command prompt to remove the IP address that you specified in step 5 from the ARP:

C:\> arp -d <IP address> <Enter> (to remove the stated IP address) or

C:\> arp -d*<Enter> (to remove all static IP addresses)

GSS 100 Graphic Still Store • HTML Control and IPL File Manager 30

Image 36
Contents GSS Safety Instructions English Copyright  X! *X1&* X2* X2#* X2! CE Contents GSS 100 Graphic Still Store Contents About this Guide About the GSS 100 Graphic Still StoreFeatures Approximate Image Space for BMP FilesMounting the GSS Rear Panel ConnectionsPower Connection Signal ConnectionsRemote Connections Ethernet connectionRJ-45 connector wiring Serial connectionReset Button Front Panel Controls and Indicators OperationPower-on Indications Front Panel OperationsSelecting an Image to Display Muting the Video OutputSwitch Effect menu Menu System OverviewOutput Configuration menu Effect submenuDuration submenu Resolution submenu RGB Delay submenuSync format submenu Sync polarity submenuSlide Show menu Pass-Thru submenuAuto Switch and slide show submenu Advanced menuInternal Temperature display Name displayMAC Address display Baud Rate submenuFront Panel Security Lockout Executive Mode Front Panel Absolute ResetProgramming Guide Symbols Simple Instruction Set ControlPower-up Switch effectGSS-initiated Unsolicited Messages Image selectionOutput configuration Auto-switch and slide show controlHost-to-GSS Instructions Front panel locksError Responses TimeoutUsing the Command and Response Tables Command and Response Table for SIS Commands Command Ascii Command Response Additional descriptionCommand/Response Table for SIS Commands Output rateEvent script control File management Symbol definitions X4 = Device nameCommand and Response Table for IP-Specific SIS Commands IP and port setup commandsHtml Control IPL File Manager Configuring the Hardware PC ConfigurationGSS Configuration Configuring the GSS using the ARP commandGSS Response to Ping Request Configuring the GSS using a direct PC connection Enter Network Password Opening the Embedded Web PagesStatus Tab System StatusConfiguration Tab System SettingsIP Settings fields Unit Name fieldDhcp radio buttons IP Address fieldGateway IP Address field Subnet Mask fieldDate/Time Settings fields Date/Time Settings FieldsVideo Settings Video SettingsPasswords PasswordsFirmware Upgrade Email AlertsClick the Firmware Upgrade link see figure File Management Tab File ManagementControl Tab ControlImage Settings Images TabUploading adding an image Deleting a stored imageSelecting a stored image Installing the IPL File Manager and Uploading Images Installing the IPL File ManagerUploading Image Files Select Startup Mode Window Special Characters Specifications Video inputVideo output Sync File loading timesMemory and image storage Control/remote video processor GeneralCrimp tools and assorted connectors Part NumbersMounting Options CablesTabletop Placement Mounting the UnitRack Mounting Furniture Mounting Under-Furniture MountingThrough-furniture mounting Extron Warranty
Related manuals
Manual 4 pages 49.96 Kb Manual 45 pages 22.45 Kb

GSS 100 specifications

Extron Electronics GSS 100 is a powerful yet compact audio signal distribution system designed to enhance the audio experience in various applications, from classrooms to corporate environments. Known for its reliability and performance, the GSS 100 serves as an essential component for signal management in modern AV systems.

One of the main features of the GSS 100 is its capability to distribute audio signals to multiple outputs while maintaining high fidelity. With the ability to handle both balanced and unbalanced signals, the GSS 100 can adapt to various audio sources and systems. This flexibility makes it suitable for a wide range of applications, including live events, presentation venues, and educational institutions.

The GSS 100 utilizes Extron’s advanced audio processing technology, which includes built-in audio mixing, equalization, and signal routing capabilities. Users can easily manage audio levels and blend multiple audio sources to create a seamless listening experience. This is particularly beneficial in environments where sound quality is paramount, allowing for adjustments that optimize the auditory experience for the audience.

Another characteristic that sets the GSS 100 apart is its intuitive user interface. The device features a straightforward control system, making it easy for users to manage and configure settings without extensive technical knowledge. Additionally, the unit is built for quick installation, with both rear and front panel connections for flexible installation options. This design consideration helps streamline setup time and minimizes disruption.

The GSS 100 also integrates seamlessly with other Extron and third-party products, enhancing its versatility in complex AV systems. With various input and output configurations, users can connect the GSS 100 to microphones, mixers, and amplifiers effortlessly. Its ability to connect to networked AV systems further extends its capabilities, enabling remote monitoring and control through software interfaces.

In conclusion, the Extron Electronics GSS 100 stands out as a premier audio signal distribution system that combines advanced technology with user-friendly features. Whether for educational purposes, corporate events, or live productions, the GSS 100 delivers reliable performance and exceptional audio quality, ensuring an optimal listening experience for any audience. As a result, it remains a popular choice among AV professionals seeking to elevate their systems with efficient and effective audio management solutions.