Maytag RCS10DA, RFS manual So...how do I use it? Digital Dial

3. Press the Hidden Pad to advance to the desired option to be changed.

• See table below for options.

4. Turn Dial to change option setting.

• 0P: and option number appear in display.

• See table below for options.

5. Press START pad to save changes.

• To change additional options, repeat steps 2 - 5.

• Changes appear after door is closed.

QuickStartReferenceGuide

Refer to Product Safety Manual for Safety Statements

Complete Owner’s Manual available online

So...how do I use it? (Digital Dial)

Heating

1.Open oven door, place food in oven, and close oven door.

2.Turn time entry knob clockwise until desired time displays.

•Factory default setting for cooking time is 10 minutes. Cooking time can be changed and set to 60 minutes. (Refer to section on changing options)

3.Press a power level pad to change power level, if desired. If no power level is selected, unit will default to 100%.

•Power level can be set from full power (100%), to 70%, 50% or DEFROST (20%).

4.Press START button.

•Oven begins operation and time counts down.

5.When cooking time has elapsed, microwave energy stops and oven signal sounds.

Interrupting Operation

Open oven door to interrupt operation or turn time entry knob counterclockwise to “0”.

To resume microwave oven operation, close door and press START .

If time was changed to “0”, time will need to be reset, and then press START.

:30 QUICK SET Pad

Allows you to reheat for 30 seconds at 100% (full) power by simply pressing the :30 QUICK SET pad. By repeatedly pressing this pad, you can extend the reheating time to 5 minutes by 30 second increments. To change the time assigned to this pad:

1.	Open oven door.		current or assigned time will show in
	• If door is closed before programming is		display.
	complete, changes are discarded.	3.	Turn Dial to change time setting.
2.	Press and hold the :30 QUICK SET pad		• Time can be set from zero (0:00)
	for approximately 5 seconds.		seconds to five minutes (5:00).
	• This activates the programming		• If the assigned time is 0:00, the :30
	mode.		QUICK SET pad is effectively
	• Microwave will beep and either		disabled.
		4.	Press START pad to save changes.

?Can I change an option?

Options can be changed to suit individual preferences.

To change options:

1. Open oven door.

• If door is closed before programming is complete, changes are discarded and microwave exits options programming mode.

2. Press and hold the Hidden Pad for approximately 5 seconds.

• This begins options programming mode.

• Microwave will beep and 0P:--appears in display.

Changing Time and

Power/Canceling

Mistakes

Heating time and power level can be changed at any time while the oven is operating. Turn knob to desired new setting. To set cooking time to zero, turn knob counterclockwise to “0”.

Hidden

Pad

Numbered Pads	Display	Options (Factory Settings in Bold)
1	OP:10	3 second continuous beep.
End of Cycle Beep	OP:11	Continuous beep until door is opened.
	OP:12	5 beep bursts until door is opened.
2	OP:20	Eliminates beep.
Speaker Volume	OP:21	Sets volume to low.
	OP:22	Sets volume to medium.
	OP:23	Sets volume to high.
3	OP:30	Prevents beep when pad is pressed.
Key Beep	OP:31	Allows beep when pad is pressed.
4	OP:40	15 seconds after oven door is opened, keyboard disabled.
Keyboard Enable	OP:41	30 seconds after oven door is opened, keyboard disabled.
Window	OP:42	1 minute after oven door is opened, keyboard
		disabled.
	OP:43	2 minutes after oven door is opened, keyboard disabled.
5	OP:50	Prevents adding heating time while oven is heating.
Add Time During	OP:51	Allows heating time to be changed while oven is
Heating		heating when a memory pad is pressed.
6	OP:60	Allows oven to resume heating time countdown after door
Reset Door Open		is opened during cycle.
		Cancels heating time count down after door is opened
	OP:61
		during cycle.
7	OP:70	Allows 60 minutes of heating time.
(some models)	OP:71	Allows 10 minutes of heating time.
Maximum Heating Time
0	OP:00	Do not display message.
Clean Filter Message	OP:01	Display message for 24 hours every 7 days.
	OP:02	Display message for 24 hours every 30 days.
	OP:03	Display message for 24 hours every 90 days.

Part No.12804404		For full product documentation visit:	♥ 2004 Amana Appliances
Revised 10/04	™	www.amanacommercial.com/wavelink	Amana, Iowa 52204
©2004 Maytag Services		16023293 Rev. 0	A–3