Maytag RCS Disassembly Procedures, Disconnecting Wire Terminals, Outer Case, Insulated terminals

Page 25

Disassembly Procedures

!WARNING

To avoid the risk of electrical shock, personal injury, or death, disconnect power to oven and discharge the capacitors before following any disassembly procedure.

High voltage is present at the high voltage terminal of the high voltage transformer during any cooking cycle.

It is neither necessary or advisable to attempt measurement of the high voltage.

Before touching any oven components or wiring, always unplug the oven from its power source and discharge capacitor.

Disconnecting Wire Terminals

All wire terminals are locking-type terminals. Proceed as follows to disconnect wire terminals:

Insulated terminals:

Grasp insulator pod and pull back.

DO NOT PULL ON WIRE.

1 Grasp

 

Wire

Insulator

2

Pull

Pod

 

 

Non-insulated terminals:

Use a small blade screwdriver to depress locking-tab and pull on terminal.

DO NOT PULL ON WIRE.

1

Release

Wire

 

locking-tab

 

 

2 Pull

 

Outer Case

1.Disconnect power to oven.

2.Remove screws securing outer case to unit.

3.Slide outer case towards rear of unit.

4.Reverse procedure to reassemble.

!

CAUTION

During disassembly some foam gaskets may require removal. These components must be replaced for proper circulation of air over the components and through the oven cavity.

©2004 Maytag Services

16023293 Rev. 0

25

Image 25
Contents Service Recognize Safety Symbols, Words, and Labels Service Support CenterImportant Information Table of Contents Important Safety Information For commercial use only Read and Follow the specificImportant Safety Information Grounding Instructions Test Procedures 2 Methods WiringServicing of Grounded Products ExplanationOven Features Equipment PlacementGeneral Information Unpacking EquipmentParts and Accessories ServiceModel Identification Condition Cause Remedy Troubleshooting ProceduresCondition Check Result Cause Remedy Troubleshooting Procedures Electronic Models Troubleshooting Procedures Electronic Models Trouble 4 Oven operates with little or no heat Troubleshooting Procedures Electronic Models Service Information Microwave Leakage Testing Troubleshooting Testing Procedures After verifying or replacing Pad Trace Measurement RLY TAB CN1 Power Test Disconnecting Wire Terminals Disassembly ProceduresOuter Case Insulated terminalsDoor Removal Door Assembly Door DisassemblyInterlock Switch Removal Interlock SwitchesControl Panel Removal High Voltage Capacitor Adjusting InterlocksDiode High Voltage Capacitor RemovalTransformer Fuse / Fuse Block / Filter AssemblyMagnetron Antenna Blower Motor or Wheel Splatter ShieldStirrer Motor Magnetron Thermal Cut-Out TCO Tray ReplacementCavity Thermal Fuse Oven Light RemovalAppendix a QuickStartReferenceGuide Do not power spraySo...how do I use it? Digital Dial QTY 2X Pad some models Clean FilterQuick Start Reference Guide Do not power spray No metal pans

RFS, RCS, RCS10DA specifications

The Maytag RCS10DA, RCS, and RFS series are some of the most innovative and reliable appliances in the modern kitchen. With a focus on performance, efficiency, and user convenience, these models stand out in the crowded market of refrigerators and freezers.

The Maytag RCS10DA is designed to deliver outstanding cooling performance while keeping energy consumption in check. One of its standout features is the Twin Cooling System, which uses two separate airflow systems to maintain optimal humidity levels in both the refrigerator and freezer sections. This technology ensures that your foods stay fresher for longer by preventing the mixing of odors and moisture.

In addition to Twin Cooling, the RCS series is equipped with the PowerCold feature. This function is particularly helpful for quickly chilling items after grocery shopping or hosting large gatherings. With a simple press of a button, the refrigerator rapidly cools down to the desired temperature, ensuring that perishable items remain safe and fresh.

The RCS and RFS models boast adjustable shelving and organizational bins that provide maximum storage flexibility. The shelves are designed to accommodate taller items, and the door bins are deep enough to hold larger bottles and containers. Furthermore, these models feature LED interior lighting that not only enhances visibility but also consumes less energy compared to traditional bulbs.

Durability is another hallmark of Maytag appliances, and the RCS series is no exception. Constructed with heavy-duty materials and a robust design, these refrigerators are built to withstand the rigors of daily use. Additionally, many models come with a stainless steel finish that resists fingerprints and makes cleaning a breeze.

Energy efficiency is a critical aspect of modern appliances, and Maytag addresses this with Energy Star certification. The RCS and RFS models are designed to use less energy without compromising performance, thereby reducing utility bills and environmental impact.

In summary, the Maytag RCS10DA, RCS, and RFS series offer a suite of features and technologies that cater to the needs of today’s consumers. With innovations like the Twin Cooling System, PowerCold feature, adjustable shelving, and a commitment to durability and energy efficiency, these models are ideal choices for anyone looking to elevate their kitchen experience. Whether you require expansive storage or quick cooling solutions, Maytag provides reliable appliances designed to meet modern demands.