Operation Guide
Two Stage Programming
1 Touch Defrost.
Display window shows "PL:30".
2 Enter defrosting time (up to 99 min. 99 sec.) by touching the number pads. For example, to set 3 minutes 50 seconds, touch 3, 5 and 0 in sequence. Display window shows “3:50”.
3 Touch Power Level. For example, to set PL:Hi, touch the Power Level pad once. Display window shows "PL:Hi”.
4 Enter cooking time (up to 99 min. 99 sec.) by touching the number pads.
For example, to set 4 minutes 50 seconds, touch 4, 5 and 0 in sequence. Display window shows "4:50".
Time Cooking con't
5 Touch Start.
The first stage defrosting time appears in the display window and counts down. As soon as the defrosting finishes, the second stage cooking time appears automatically and counts down.
Start(MW630WA/MW630WB)
One touch allows the oven to begin.
If the door is opened while the oven is operating, the cooking will pause. The Start pad must be touched again to continue the cooking operation after the door is closed.
Pause/Cancel(MW630WA/MW630WB)
Use the Pause/Cancel pad to:
1.Erase if you make a mistake during programming.
2.Cancel the minute timer.
3.Stop the oven temporarily during cooking.
4.To cancel a program during cooking, touch twice.
How to Correct Programming Errors
Mistakes made when entering program information can be corrected by touching the Pause/Cancel pad and then
NOTE
A cooking program entered in one stage can not be changed after you have started to enter the program for the next stage. To correct, the Pause/Cancel pad must be touched and all cooking instructions re- entered beginning with the first stage.
No changes in programs can be made after the oven has started operating. To make a change you must touch the Pause/Cancel pad and
12