Bunn S/N 0005473 & UP manual Dispenser USE, Initial Fill Ambient Concentrates Optional, Priming

Page 9

INITIAL FILL (cont)

Ambient Concentrates (Optional)

1.Install an Ambient Concentrate Conversion Kit (BUNN-O-MATIC part number 33699.0000) per the instruc- tions provided in the kit.

2.Attach the concentrate product hose to the appropriate concentrate line located behind the dispenser’s splash panel.

3.Attach the other end of the product hose to the product container through an appropriate fitting.

PRIMING

1.Open the dispenser door

2.Load concentrate per instructions in section titled Loading.

3.Close the dispenser door.

Note: The dispenser will not operate with the door open.

4.Place a large container under the appropriate dispense nozzle.

5.Dispensers with Press and Hold Feature:

Press and hold the “Product Dispense Switch” Fig 4, until concentrate dispenses from the dispense nozzle.

Dispensers with Portion Control Feature:

Press and hold the “+/STOP Switch” Fig 5, until concentrate dispenses from the dispense nozzle. Note: This may take several seconds, depending on the installation and programmed pump speed.

DISPENSER USE

Press and Hold Models (Refer to Fig 4)

1.Place a cup on the drip tray beneath the desired dispensing nozzle.

2.Press and hold the “Product Dispense” or “Chilled Water” switch until the beverage/water reaches the desired level, then release.

Portion Control Models (Refer to Fig 5)

1.Place a cup on the drip tray beneath the desired dispensing nozzle.

2.Momentarily press the appropriate cup size switch to dispense the beverage. The dispenser is factory preset to produce the approximate beverage sizes as follows:

Small (4.0 seconds): approximately 7 fl.oz. (207 ml)

Medium (6.9 seconds): approximately 12 fl.oz. (355 ml)

Large (9.1 seconds): approximately 16 fl.oz. (473 ml)

The dispense times can be individually programmed by following the procedures described in ADJUST- MENT - Cup Size Programming.

To stop a timed dispense, momentarily press the “+/Stop Switch”.

3.To “top-off” a beverage, press and hold the “+/Stop Switch” until the beverage reaches the desired level, then release.

4.To dispense chilled water, press and hold the “Chilled Water Switch” until the water reaches the desired level, then release.

9

38218.1 030306

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Phone 217 529-6601 FAX 217 JDF-4BUNN-O-MATIC Commercial Product Warranty User Notices ContentsElectrical Requirements Initial SET-UPCE Requirements Electrical HOOK-UPPlumbing Requirements Plumbing HookupPlumbing Connections Sanitize Switch Refrigeration SwitchOperating Controls Water Bath ValveOperating Controls Initial Fill LoadingFrozen Concentrates Initial Fill Ambient Concentrates Optional Dispenser USEPriming Press and Hold Models Refer to FigCleaning & Preventive Maintenance Daily Parts WashingWeekly Sanitizing Cleaning Annually Replace Pump Tubing Cleaning Monthly Clean Condenser Air FilterAdjustment & Optional Settings Total Dispense Ratio Set Up ProcedureTemperature Compensated Refractometer Method Product Brix % Mix RatioPer 3-second test Pump Speed ProgrammingChilled Water Flow Testing and Adjustment Adjustment & Optional SettingsCup Size Programming Portion Control Dispensers Only Dispenser LockoutService Lockout Adjustment & Optional Settings Password Protection Beeper Fault Dispense Fault ListCooling Fault List DBC display FaultRefill indicator when concentrate out is detected Dip Switch Function ListControls Off Audio feedback during dispenses104 Set Pump 4 RPM Concentrate B Function ListProblem TroubleshootingCold Water Circulation Probable CauseProblem Probable Cause Remedy TroubleshootingRefrigeration Dispenser Locked OutDispense/Rinse switch mem- brane open simultaneously Bottle adapter switch mem- braneWater only Concentrate onlyCant access programming Programming password feature Initial fill/setupPassword Nect fittingsIs powered from the step-down Fault codesOnce water is set, adjust motor Step-down transformerDifficulty brixing and/or weak bev Pump tubing Erage Problem Probable CauseStation Use of portable water pumpCoolant Schematic Diagram Schematic Wiring Diagram Schematic Wiring Diagram JDF-4 Dispense Deck Circuit Schematic Wiring Diagram JDF-4 Control Panel Circuit GND L1 N

S/N 0005473 & UP specifications

The Bunn S/N 0005473 & UP is a remarkable coffee brewing system that blends innovative technology with user-friendly features, catering to both commercial and home brewing needs. Known for its durability and reliability, this model has garnered acclaim among coffee enthusiasts and professionals alike.

One of the standout features of the Bunn S/N 0005473 & UP is its rapid brew technology. This system enables the brewing of high-quality coffee in less time than conventional methods. With a typical brewing cycle of just a few minutes, users can enjoy fresh coffee quickly, making it an ideal choice for busy environments like cafes, restaurants, and offices.

In terms of capacity, this Bunn model is equipped with a generous water reservoir that can hold several gallons, allowing for multiple brewing cycles without the need for constant refilling. This is particularly beneficial in high-demand settings where speed and efficiency are paramount. Furthermore, the system is designed to accommodate a variety of coffee types, from standard drip to specialty blends, providing versatility for users.

The Bunn S/N 0005473 & UP also features an adjustable brewing temperature, ensuring that the coffee is brewed at the optimal heat for extraction. This capability plays a crucial role in achieving the perfect flavor profile, allowing users to experiment with different beans and roasts.

Another notable characteristic of this model is its user-friendly interface. The intuitive controls enable both novice and experienced users to operate the machine with ease, reducing the learning curve associated with brewing great coffee. Additionally, maintenance is simplified with removable components that can be easily cleaned, promoting longevity and consistent performance.

Energy efficiency is also a key consideration in the design of the Bunn S/N 0005473 & UP. With a focus on reducing power consumption, this coffee maker operates discreetly in the background while remaining ready to brew at a moment’s notice.

Overall, the Bunn S/N 0005473 & UP stands out as a reliable and efficient coffee brewing system. With its combination of rapid brew technology, adjustable temperature settings, and user-friendly design, it caters to a wide range of coffee preferences and environments, ensuring that every cup is a delightful experience. This model continues to be a favorite among both casual drinkers and coffee connoisseurs.
Top Page Image Contents