Bunn IMIX -3S+A, IMIX -5S+A User Notices, 00831.0000, 28328.0011, 37881.0000, 28328.0010

Page 3

USER NOTICES

The notices on this dispenser should be kept in good condition. Replace unreadable or damaged labels.

!WARNING

Fill water tank before turning - on - thermostat or connecting appliance to power source.

Use only on a properly protected circuit capable of the rated load.

Electrically ground the chassis.

Follow national/local electrical codes.

Do not use near combustibles.

FAILURE TO COMPLY RISKS EQUIPMENT

DAMAGE, FIRE, OR SHOCK HAZARD

READ THE ENTIRE OPERATING MANUAL

BEFORE BUYING OR USING THIS PRODUCT

THIS APPLIANCE IS HEATED WHENEVER

CONNECTED TO A POWER SOURCE

00831.0000F 3/98 ©1998 BUNN-O-MATIC CORPORATION

00831.0000

H O T

L I Q U I D

RELEASE BUTTON WHEN CUP IS 3/4 FULL

PLACE

PLACE

PLACE

CUP

CUP

CUP

HERE

HERE

HERE

IMIX-3S+/IMIX-3S+A

28328.0011

As directed in the International Plumbing Code of the International Code Council and the Food Code Manual of the Food and Drug Administration (FDA), this equipment must be installed with adequate backflow prevention to comply with federal, state and local codes. For models installed outside the U.S.A., you must comply with the applicable Plumb- ing /Sanitation Code for your area.

00656.0001

37881.0000

IMIX-5S+/IMIX-5S+A

28328.0010

00824.0002

3

38987 051311

 

Image 3
Contents IMIX-3S+ IMIX-3S+A IMIX-5S+ IMIX-5S+A BUNN-O-MATIC Commercial Product Warranty 37881.0000 User Notices00831.0000 28328.0011Initial SET-UP CE RequirementsElectrical Requirements Plumbing HOOK-UP Preset Tank TemperatureRinse Timer Plumbing RequirementsHopper Dispense Rate of Product Door Graphic and Lens InstallationPreventive Maintenance Running a Rinse Sequence24h CleaningGlossary Gram Home Screen Program Home Screen Programming SwitchesProgramming the Dispenser Important Programming Notes Read CarefullyProgramming Lockout Switch Programming the Dispenser NORMAL/PROGRAM/RINSE switchProgramming the Dispenser Returns to E Adjust hopper Motor speed for Station selectedReturns to G Goes to next stationContinues after last Station