Bunn FMD0013000-UP service manual Introduction, User Notices

Page 3

INTRODUCTION

This equipment dispenses hot beverages or soup on demand from powdered product. It has three hoppers. This equipment may also dispense cold beverages from powdered product from the left dispense station. It is for indoor use only on a sturdy counter or shelf.

USER NOTICES

Carefully read and follow all notices on the equipment and in this manual. They were written for your protection. All notices are to be kept in good condition. Replace any unreadable or damaged labels.

28301.0003

!WARNING

Fill water tank before turning - on - thermostat or connecting appliance to power source.

Use only on a properly protected circuit capable of the rated load.

Electrically ground the chassis.

Follow national/local electrical codes. Do not use near combustibles.

FAILURE TO COMPLY RISKS EQUIPMENT

DAMAGE, FIRE, OR SHOCK HAZARD

READ THE ENTIRE OPERATING MANUAL BEFORE BUYING OR USING THIS PRODUCT

THIS APPLIANCE IS HEATED WHENEVER

CONNECTED TO A POWER SOURCE

00831.0000F 3/98 ©1998 BUNN-O-MATIC CORPORATION

00831.0000

CONTROL THERMOSTAT ADJUSTMENT

OFF

BUNN

OFF

BUNN

 

BUNN

OFF

HI

 

 

 

HI

 

 

HI

 

 

 

 

 

 

 

 

200 F

190 F

180 F

APPROXIMATE THERMOSTAT TEMPERATURE SETTINGS

28368.0004A 08/08 © 2008 BUNN-O-MATIC CORPORATION

28368.0004

28328.0000

As directed in the International Plumbing Code of the International Code Council and the Food Code Manual of the Food and Drug Administration (FDA), this equipment must be installed with adequate backflow prevention to comply with federal, state and local codes. For models installed outside the U.S.A., you must comply with the applicable Plumb- ing /Sanitation Code for your area.

00656.0001

37881.0000

160°

190°

00824.0002 TEMPERATURE HEATER

ADJUSTMENT

26527.0003

THERMOSTAT ASSEMBLY

BUNN-O-MATIC CORP

120VAC

ELECTRONIC THERMOSTAT

26536.0003

3

29170 051111

 

Image 3
Contents FMD-3 BUNN-O-MATIC Commercial Product Warranty User Notices IntroductionElectrical Hook-Up Initial SET-UPCE Requirements Electrical RequirementsInitial fill & heat Plumbing RequirementsPlumbing HOOK-UP Early Models Plumbing HOOK-UP Late ModelsRunning a Rinse Sequence Preset Tank TemperatureRinse Timer Liquid Level ControlAdjustments Hopper Dispense Rate of ProductHopper Throw Test 24h CleaningDraining the hot water tank Preventive Maintenance

FMD0013000-UP specifications

The Bunn FMD0013000-UP is a state-of-the-art beverage dispenser designed to meet the demanding needs of commercial environments. This model is well-known for its efficiency, reliability, and versatility, making it a popular choice among restaurants, cafes, and convenience stores. With a sleek and modern design, the FMD0013000-UP combines advanced technology with user-friendly features to deliver high-quality beverages quickly and efficiently.

One of the standout features of the Bunn FMD0013000-UP is its intuitive touchscreen interface. This easy-to-navigate display allows users to select from a wide variety of drink options, including coffee, tea, flavored beverages, and more. The touchscreen provides real-time feedback and troubleshooting, streamlining the operation. The configuration can also be customized to suit specific business needs, ensuring a tailored beverage service that can attract and retain customers.

Another significant characteristic of the FMD0013000-UP is its high-capacity design. The unit can dispense multiple beverages simultaneously, which is essential during peak hours. With its advanced cold beverage dispensing technology, it is capable of maintaining consistent beverage temperatures, ensuring customers enjoy drinks at the optimal temperature every time. This model also features programmable portion control, allowing operators to control the amount dispensed to reduce waste and maintain profitability.

The Bunn FMD0013000-UP incorporates durable construction materials, ensuring longevity and ease of maintenance. Its components are designed to withstand the rigors of daily use, minimizing downtime. Additionally, the unit features automatic self-diagnostics which help identify issues before they escalate, making it easier to manage maintenance effectively.

In terms of efficiency, this beverage dispenser is designed to optimize energy use while delivering peak performance. Its advanced cooling and heating systems ensure that beverages are always served at the optimal temperature, reducing energy consumption over time. The Bunn FMD0013000-UP's compact design allows for easy placement in various settings, maximizing space without compromising performance.

Overall, the Bunn FMD0013000-UP stands out for its innovative technology, robust construction, and user-friendly features. It offers a perfect balance of functionality and reliability, making it an excellent investment for businesses looking to enhance their beverage service and cater to the diverse tastes of their customers.