Bunn CDBC TC, CDBCF TC, CDBCF APS Troubleshooting, Refill Circuit Problem Probable Cause, Remedy

Page 11

TROUBLESHOOTING (cont.)

 

 

 

REFILL CIRCUIT

 

 

 

PROBLEM

 

PROBABLE CAUSE

Will not fill or refill

1.

Power off to brewer

 

2.

Water shut off

 

3.

Display flashing

4. ON/OFF Switch

5. Lime build up on Probe

6. Refill Valve or Control Board

REMEDY

Press OFF/ON switch on control panel to determine if power is ON.

Make sure water is ON.

Brewer has shut down due to mal- function (See Diagnostic Chart in manual, Page 20, or under top lid of brewer).

Make sure ON/OFF Switch is "ON" and indicator is lit.

Remove the Level Probe and check for lime deposit on tip. Clean and reinstall.

Disconnect the brewer from the power source and remove wires from refill valve coil. Check for con- tinuity across the terminals of the solenoid coil. If continuity is not present, replace the refill valve (See page 29). If continuity is present, the coil may be stuck closed. Shut water off to brewer. Set the ON/OFF switch to the "OFF" position. Open the faucet and drain water down in the tank until flow stops or slows to a trickle. Attach a voltmeter to the terminals of the refill solenoid. Con- nect the brewer to the power source. Press the switch "ON". Within five seconds, voltage should be present at the solenoid terminals. If voltage is not present, refer to the wiring diagrams and check the wiring har- ness.

Page 11

29707.1 021804

 

Image 11
Contents Disco Ntinued V ERS ION Introduction ContentsCdbcf APS-DV & TC-DV Brewers User NoticesCDBCF-DV Brewers Cdbcf APS-DV Brewers#02765.0000 #12364.0000 #00656.0000 Electrical Requirements Models CDBC-DV, CDBC-APS DV & Cdbcf TC-DVFaucet Models Plumbing RequirementsInitial SET-UP Coffee BrewingOperating Controls CleaningSetting Brew Temperature Adjustments & Optional SettingsNow disabled Pulse Brew Setup ProceedureWater Sensing Threshold Adjustment Procedure Before troubleshooting this brewer, check for the following TroubleshootingRemedy TroubleshootingRefill Circuit Problem Probable Cause Troubleshooting Refill Circuit Water does not heat to proper tem- perature Heating Circuit ProblemIngs are taken Troubleshooting Heating CircuitProblem Probable Cause Tank HeaterProblem Probable Cause Remedy Brewing Circuit Problem Probable Cause Brew cycle will not start Control board or dispense valve Troubleshooting Brewing CircuitConsistently low beverage level Brew volume Dispenser Be made with sprayhead installedRequired Water temperatureSet-upinstructions Dripping from sprayhead Lime build upProblem Probable Cause Cause Things to Check DiagnosticsComponent Access When servicing, except when electrical tests are reControl Board ServiceSwitch Panel Dispense Valve Limit Thermostat Limit Thermostat WiringValve from the bottom of the tank Tank Heaters29707.1 Voltage Selector Switch Terminals Voltage Selector SwitchRefill Valve Warmer Elements Schematic Wiring Diagram Cdbc DV Schematic Wiring Diagram Cdbc APS-DV Cdbcf APS/TC/LPTC-DV

CDBC TC, CDBC APS, CDBCF TC, CDBCF APS specifications

The Bunn CDBCF series of coffee brewers is an essential tool for any coffee business, renowned for its reliability and efficiency. This series offers different models including the CDBCF APS (Automatic Pour-Over) and CDBCF TC (thermo carafe), among others. Each of these brewers is designed to produce exceptional quality coffee while ensuring ease of use.

One of the main features of the Bunn CDBCF APS is its automatic pour-over capability, which ensures that water is heated to the perfect brewing temperature and dispensed consistently. This model is equipped with a stainless steel water tank that maintains optimal water temperature, resulting in flavorful coffee extraction. Furthermore, the APS model allows for quick brewing cycles, producing up to 3.8 gallons of coffee per hour, making it ideal for high-demand environments.

The CDBCF TC model, on the other hand, utilizes a thermal carafe to keep coffee hot for extended periods without the need for a hot plate. This technology not only preserves the coffee’s flavors and aromas but also minimizes energy consumption. The thermal carafe can hold up to 1.9 liters of brewed coffee, making it efficient for serving in busy settings.

Both models in the CDBCF series come with a simple interface for straightforward programming and operation. Features such as the BrewLOGIC technology help regulate the brewing time and monitor water flow to ensure consistency. This is particularly beneficial in maintaining the quality of coffee across multiple brewing batches.

In terms of build quality, Bunn CDBCF brewers are constructed with durable materials designed to withstand the wear and tear of daily use in busy coffee shops. Their compact design requires minimal counter space while providing a high volume of output.

Overall, the Bunn CDBCF APS and TC models stand out for their advanced brewing technologies, versatility, and user-friendly design. They cater perfectly to coffee enthusiasts and business owners looking for reliable brewing solutions that deliver consistent quality and taste. With the Bunn CDBCF series, coffee brewing becomes not only an art but also an efficient and seamless process.