Bunn CDBC APS, CDBCF TC, CDBCF APS, CDBC TC manual Warmer Elements

Page 30

SERVICE (cont.)

WARMER ELEMENT(S)

P1859

FIG. 13 WARMER ELEMENTS

Location:

The warmer element(s) is located under the warmer plate.

Test Procedures:

1.Disconnect the brewer from the power source.

2.With a voltmeter, check voltage across the two wires at the warmer element with the "ON/OFF" switch in the "ON" position. Connect the brewer to the power source. The indication must be 120 volts ac for two wire 120 volt models and three wire 120/208 and 120/240 volt models.

3.Disconnect the brewer from the power source.

If voltage is present as described, proceed to #4.

If voltage is not present as described, refer to Wiring Diagrams and check brewer wiring harness.

4.Check the continuity across the two terminals on the warmer element.

If continuity is present as described, reconnect the two wires to the warmer element.

If continuity is not present as described, replace the warmer element.

Removal and Replacement:

1.Remove the three #4-40 screws securing the warmer assembly to the brewer.

2.Lift the warmer assembly from the brewer.

3.Disconnect the two wires from the warmer ele- ment terminals.

4.Remove the two #8-32 nuts securing the warmer element to the warmer plate.

5.Securely install new warmer element.

6.Reconnect the two wires to warmer element termi- nals.

7.Securely install warmer assembly on the brewer.

8.Refer to the Wiring Diagrams when reconnecting the wires.

Page 30

29707.1 082803

 

Image 30
Contents Disco Ntinued V ERS ION Contents IntroductionCdbcf APS-DV Brewers User NoticesCDBCF-DV Brewers Cdbcf APS-DV & TC-DV Brewers#02765.0000 #12364.0000 #00656.0000 Models CDBC-DV, CDBC-APS DV & Cdbcf TC-DV Electrical RequirementsCoffee Brewing Plumbing RequirementsInitial SET-UP Faucet ModelsCleaning Operating ControlsAdjustments & Optional Settings Setting Brew TemperaturePulse Brew Setup Proceedure Water Sensing Threshold Adjustment ProcedureNow disabled Troubleshooting Before troubleshooting this brewer, check for the followingTroubleshooting Refill Circuit Problem Probable CauseRemedy Troubleshooting Refill Circuit Heating Circuit Problem Water does not heat to proper tem- peratureTank Heater Troubleshooting Heating CircuitProblem Probable Cause Ings are takenProblem Probable Cause Remedy Brewing Circuit Problem Probable Cause Dispenser Be made with sprayhead installed Troubleshooting Brewing CircuitConsistently low beverage level Brew volume Brew cycle will not start Control board or dispense valveDripping from sprayhead Lime build up Water temperatureSet-upinstructions RequiredProblem Probable Cause Diagnostics Cause Things to CheckWhen servicing, except when electrical tests are re Component AccessService Control BoardSwitch Panel Dispense Valve Limit Thermostat Wiring Limit ThermostatTank Heaters Valve from the bottom of the tank29707.1 Voltage Selector Switch Voltage Selector Switch TerminalsRefill Valve Warmer Elements Schematic Wiring Diagram Cdbc DV Schematic Wiring Diagram Cdbc APS-DV Cdbcf APS/TC/LPTC-DV

CDBC TC, CDBC APS, CDBCF TC, CDBCF APS specifications

The Bunn CDBCF series of coffee brewers is an essential tool for any coffee business, renowned for its reliability and efficiency. This series offers different models including the CDBCF APS (Automatic Pour-Over) and CDBCF TC (thermo carafe), among others. Each of these brewers is designed to produce exceptional quality coffee while ensuring ease of use.

One of the main features of the Bunn CDBCF APS is its automatic pour-over capability, which ensures that water is heated to the perfect brewing temperature and dispensed consistently. This model is equipped with a stainless steel water tank that maintains optimal water temperature, resulting in flavorful coffee extraction. Furthermore, the APS model allows for quick brewing cycles, producing up to 3.8 gallons of coffee per hour, making it ideal for high-demand environments.

The CDBCF TC model, on the other hand, utilizes a thermal carafe to keep coffee hot for extended periods without the need for a hot plate. This technology not only preserves the coffee’s flavors and aromas but also minimizes energy consumption. The thermal carafe can hold up to 1.9 liters of brewed coffee, making it efficient for serving in busy settings.

Both models in the CDBCF series come with a simple interface for straightforward programming and operation. Features such as the BrewLOGIC technology help regulate the brewing time and monitor water flow to ensure consistency. This is particularly beneficial in maintaining the quality of coffee across multiple brewing batches.

In terms of build quality, Bunn CDBCF brewers are constructed with durable materials designed to withstand the wear and tear of daily use in busy coffee shops. Their compact design requires minimal counter space while providing a high volume of output.

Overall, the Bunn CDBCF APS and TC models stand out for their advanced brewing technologies, versatility, and user-friendly design. They cater perfectly to coffee enthusiasts and business owners looking for reliable brewing solutions that deliver consistent quality and taste. With the Bunn CDBCF series, coffee brewing becomes not only an art but also an efficient and seamless process.