Avanti WD29EC Taking Dispenser OUT of Service, Troubleshooting Guide, Problem Possible Cause

Page 8

TAKING DISPENSER OUT OF SERVICE

?If the water dispenser will not be used for a long period of time, unplug the power cord from the wall outlet.

?Drain the water through the faucets.

?Drain the water from the tank by removing the plug from the bottom of the dispenser.

PROBLEMS WITH YOUR WATER DISPENSER?

You can solve many common water dispenser problems easily, saving you the cost of a possible service call. Try the suggestions outlined below to see if you can solve the problem before calling the servicer.

TROUBLESHOOTING GUIDE

PROBLEM	POSSIBLE CAUSE
Water dispenser does not operate.	Not plugged in.
	The circuit breaker tripped or a blown fuse.
Water cooler is not cold enough.	Check to be sure the power switch on the back is
	ON.
	Too much water has been drawn within a short
	period of time. If more than two 8 oz. Cups have
	been drawn within a 25-minute span, you will need
	to wait up to one hour to reach optimal
	temperature.
Vibration.	Check to assure that the water dispenser is level.

8

Image 8

Contents Avanti Products Box 520604 Miami, Florida WD29ECManual DE Instrucciones Model NUMBER/NUMERO DE Modelo Registration Information Avanti Customer Service If YOU Need ServiceHelp US Help YOU Read this guide carefullyParts and Features Page Important Safety Instructions Installation GuidelinesBefore Using Your Water Dispenser Operation InstructionsCare and Maintenance Operating Your Water DispenserSteps To Replace Water Bottle Cold Water ControlTaking Dispenser OUT of Service Troubleshooting GuideProblems with Your Water DISPENSER? Problem Possible CauseService for Your Water Dispenser Avanti Products Customer ServicesWhat is not Covered Your Avanti Products WarrantyWhat is Covered Limited ONE-YEAR Warranty Wiring Diagram Instrucciones EN Español Guia Para Resolver Problemas Posibles Problemas Causa