Electro-Voice R100 manual Specifications

Page 7

R100 OWNERS MANUAL

R100 SYSTEM SPECIFICATIONS

SPECIFICATIONS

Receiver Type

Single-frequency, single-conversion superheterodyne FM

Frequency Range (RF)

174.100 – 185.300 MHz

Available Frequencies

174.100; 178.100; 178.500; 179.100 180.200; 183.700; 184.350; 185.350 MHz

Diversity

Full True Diversity

RF Sensitivity

<.8 uV for 12 dB SINAD FCC Data Approved under part 15 Audio Output,

Frequency Response 20 – 15 kHz + 2 dB

Audio Output Level

0.775V RMS @ 100 K ohm load Distortion

Less than 0.5% Signal-to-Noise Ratio

>94 dB Dynamic Range

94 dB

VHF Transmitters HTV, BLV, BPV, BEV, BGV RF Frequency Range

174.100 – 185.300 MHz Radiated RF Output

35 to 45 mW typical, 50-mW max. Microphone Element (HTV)

Electro-Voice MC500 cardioid Lavalier Microphone (BLV)

Electro-Voice OLM20 omnidirectional Headset Microphone (BEV)

Electro-Voice HM2 cardioid Audio Gain Adjustment Range

40 dB

TA4F Connector Wiring (BPV):

Pin 1: Ground; Pin 2: Mic Input;

Pin 3: +5 volt bias;

Pin 4: +5 volt bias fed through a

3 K ohm resistor for 2-wire electrets Battery Life

8 – 10 hours with 9-Volt alkaline Bodypack Antenna

Uses microphone cable Size (Handheld transmitter) 27.3 cm (10.75 in) long

Weight (Handheld transmitter) 10.0 oz / 284 g with battery

Size (Bodypack transmitter)(HxWxD)

4.4 in x 2.6 in x .9 in

111 mm x 66 mm x 23 mm Weight (Bodypack transmitter)

4 oz / 113.4 grams

FCC Data

Accepted under part 74H

Accessories:

 

OLM10

Omni lavalier mic w/windscreen and clip

450563

Windscreen for OLM10

300059000

Clip for OLM10

ULM20

Unidirectional lavalier mic, windscreen

 

and clip

879155

ULM20 windscreen

879156

ULM20 clip

HM2

Unidirectional headset condenser mic

450124

Spring-adjusted mic stand adapter

RMR

Rack-mount kit for two receivers

Optional Accessories:

RMR

Rack-mount kit

PSRUS

120-volt power supply

(730123-1)

 

PSRER

230-volt power supply

PSRBR

240-volt power supply

page 7

Image 7
Contents R100 Series Wireless Table of Contents R100 Series Components DescriptionQuick Setup and USE Bodypack Transmitter Setup Potential Sources of Interference Battery RecommendationsSpecifications FCC Regulations Case of Difficulty Instalation for Receiver Rack Mount KIT Part Number 535427

R100 specifications

The Electro-Voice R100 is a dynamic microphone that stands out in the competitive landscape of budget-friendly audio equipment. Designed for both novice and professional users, this microphone offers exceptional quality and versatility, making it an ideal choice for a variety of applications including live performances, studio recordings, and public speaking.

One of the R100's key features is its cardioid polar pattern, which effectively concentrates on sound sources directly in front of the microphone while minimizing background noise and feedback from the sides and rear. This characteristic is particularly beneficial in environments where ambient noise could interfere with the clarity of vocals or instruments. The cardioid design enhances sound isolation, making the R100 suitable for both vocalists and instrument amplification.

The microphone is built with a rugged, durable construction that ensures it can withstand the rigors of frequent use. Its all-metal body not only provides physical resilience but also contributes to a high-quality feel in hand. The mesh grille protects the internal components from damage while also providing pop protection against sibilance and plosives, making it effective for vocal applications without the need for additional filters.

The R100 features a frequency response tailored for a smooth and natural sound, ranging from 50 Hz to 15 kHz. This response allows for clear voice reproduction while still capturing the nuances of musical instruments. It excels in reproducing mid-range frequencies, which are critical for delivering clear and articulate vocal performances.

In terms of connectivity, the Electro-Voice R100 utilizes a standard XLR output, making it compatible with a wide range of audio equipment, including mixers, interfaces, and PA systems. This universal compatibility simplifies integration into existing setups, whether for live or studio applications.

Additionally, the microphone is designed with a lightweight build, making it easy to handle for extended periods without causing fatigue. Its user-friendly characteristics make the R100 an excellent entry-level microphone for beginners, while still providing the performance quality that experienced users expect.

With its balance of affordability, durability, and sound quality, the Electro-Voice R100 emerges as a reliable microphone option that caters to a diverse array of audio needs. Whether you are a performer, podcaster, or recording artist, the R100 offers a practical and effective solution for capturing audio with clarity and precision.