CDA HVN 32 manual Tips for Installation

Page 17

17

TIPS FOR INSTALLATION

Installation

CAUTION:

This appliance shall only be serviced by authorised personnel.

This appliance is to be installed only by an authorised person according to the current local regulations and in observation of the manufacturer’s instructions.

Incorrect installation, for which the manufacturer accepts no responsibility, may cause personal injury of damage.

Always disconnect the cooktop from mains power supply before carrying out any maintenance operations or repairs.

WARNING !

We would point out that the adhesive which bonds the plastic laminate to the furniture must withstand temperatures not less than 150 °C to avoid delamination.

The appliance must be housed in heat resistant units.

The walls of the units must be capable of resisting temperatures of 75 °C above room temperature.

300

0 51

A

490

27

5

 

50

(1)

A

50 mm

from top of countertop

to bottom metal cover

 

 

 

68 mm

from top of countertop

to terminal block

 

 

 

(1): at least 50 mm between the back side of the cut-out and the back of the countertop.

Fig. 3

Image 17
Contents HVN 32 .. Touch Control Induction Cooking Hob Appliance Model Serial Number Appliance InformationDeclaration of CE Conformity Before Using for the First Time  WARNING Important Safeguards and RecommendationsCooking Zones Features and Technical DataTouch-Control Description Electrical insulation ClassUse of Induction Hob Overheating of Cooking Zone Let the cooking zone cool down before usingThermal Protection Cookware for Induction Cooking Induction Cooking SystemInduction Cooking Zone Minimum Pan Diameter Recommended 80 mmSwitching OFF How To Turn the Touch Control on and OFFSwitching on Afterheat in Cooking Zone/s Power Ignition and Adjustment of a Cooking ZoneBooster Function Rear Cooking Zone Only Induction Heaters Power ManagementThis function is available for the rear cooking zone only With the zone at the Booster levelSafety Key-Lock to Protect Children Seconds Program for Automatic Switching OFF of One Cooking ZonePress any button of the touch control to reset the timer Hours Operation Time Limit of Cooking ZonesTime Limit Display/s OFF or Not Correctly Operating Error Code on the Display/sStainless Steel Elements Side Stainless Steel Trims Cleaning and MaintenanceCleaning the Ceramic Hob Installation Tips for InstallationOven with Cooling fan Min 30 mm Adhesive side Fastening the CooktopGreen & Yellow = Earth, Blue = Neutral, Brown = Live Mains Electricity ConnectionType H05RR-F Connection of the Power Supply CableFeeder Cable Section Contact Telephone Numbers Appliance ServicingPage Cod ß5