CDA HVN 32 Mains Electricity Connection, Green & Yellow = Earth, Blue = Neutral, Brown = Live

Page 20

20

Mains Electricity Connection

Incorrect installation may be dangerous and the manufacturer can not be held responsible. Warning! This appliance must be earthed The manufacturer declines all responsibility for any problem caused by failure to observe this rule.

THIS APPLIANCE MUST BE CONNECTED TO THE MAINS SUPPLY BY A COMPETENT PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWITCH AND PROTECTED BY A SUITABLE FUSE. THIS APPLIANCE IS NOT SUITABLE FOR CONNECTION TO A 13A PLUG OR SUPPLY.

We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations.

The wires in the mains lead of this appliance are coloured in accordance with the following code:

Green & Yellow = Earth, Blue = Neutral, Brown = Live.

As the colours of the wires in the mains lead for the appliance may not correspond with the coloured markings identifying the terminals connecting to the fuse spur, proceed as follows:

The wire which is coloured green and yellow must be connected to the terminal marked E (Earth) or coloured green.

The wire which is coloured blue must be connected to the terminal marked N (Neutral), or coloured black.

The wire which is coloured brown must be connected to the terminal marked L (Live), or coloured red.

Note: Use a suitable fuse (16A minimum).

The mains cable must only be replaced by a qualified electrician or service engineer and must be of equivalent or better rating (i.e. 1.5mm2, H05RR-F).

Assembly and electrical connection should be carried out by specialised personnel.

When installing this product we recommend you seek the help of another individual.

Image 20
Contents HVN 32 .. Touch Control Induction Cooking Hob Appliance Model Serial Number Appliance InformationDeclaration of CE Conformity Before Using for the First Time Important Safeguards and Recommendations  WARNINGFeatures and Technical Data Cooking ZonesTouch-Control Description Electrical insulation ClassUse of Induction Hob Overheating of Cooking Zone Let the cooking zone cool down before usingThermal Protection Induction Cooking System Cookware for Induction CookingInduction Cooking Zone Minimum Pan Diameter Recommended 80 mmSwitching OFF How To Turn the Touch Control on and OFFSwitching on Power Ignition and Adjustment of a Cooking Zone Afterheat in Cooking Zone/sInduction Heaters Power Management Booster Function Rear Cooking Zone OnlyThis function is available for the rear cooking zone only With the zone at the Booster levelSafety Key-Lock to Protect Children Seconds Program for Automatic Switching OFF of One Cooking ZonePress any button of the touch control to reset the timer Hours Operation Time Limit of Cooking ZonesTime Limit Error Code on the Display/s Display/s OFF or Not Correctly OperatingStainless Steel Elements Side Stainless Steel Trims Cleaning and MaintenanceCleaning the Ceramic Hob Tips for Installation InstallationOven with Cooling fan Min 30 mm Fastening the Cooktop Adhesive sideMains Electricity Connection Green & Yellow = Earth, Blue = Neutral, Brown = LiveType H05RR-F Connection of the Power Supply CableFeeder Cable Section Appliance Servicing Contact Telephone NumbersPage Cod ß5