CDA Cooktop Installation: Ensuring Safety in the Green Zone

Page 18

18

This cooktop can be built into a working surface 30 to 40 mm thick and 600 mm deep.

In order to install the ceramic hob into the kitchen fixture, a hole with the dimensions shown in figure 3 has to be made, keeping in consideration the following:

The cooktop shall not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes dryer, as the humidity may damage the cooktop electronics.

If the cooktop is installed above an oven, the oven shall be provided with cooling fan. The two appliances should be connected to the electrical supply with independent connections.

IMPORTANT WARNING! This cooktop requires adequate supply of fresh, cool air to fully function. The base of the cooktop must have direct unrestricted ventilation to the room where the cooktop is installed. Follow the requirements of figure 5.

The ceramic hob must be kept no less than 60 mm away from any side wall (see figure 4).

The rear wall must be at least 50 mm from the ceramic hob (see figure 3).

There must be a distance of at least 650 mm between the hob and any wall cupboard or extractor hood positioned immediately above (see fig. 4).

The coatings of the walls of the unit or appliances near the cooktop must be heat resistant.

Do not install the appliance near inflammable materials (eg. curtains).

450 mm

650 mm

60 mm minimum between the side

of the cut-out and the side wall

Fig. 4

 

 

7 mm

7 mm

Oven with

 

mm

 

70

cooling fan

 

 

 

min 30 mm

 

min 30 mm

Minimum clearances and

 

Minimum clearances and

ventilation requirements

 

ventilation requirements

(oven installed below)

Fig. 5

(cupboard or drawer space below)

Image 18
Contents HVN 32 .. Touch Control Induction Cooking Hob Appliance Information Declaration of CE ConformityAppliance Model Serial Number Before Using for the First Time Important Safeguards and Recommendations  WARNINGTouch-Control Description Features and Technical DataCooking Zones Electrical insulation ClassUse of Induction Hob Let the cooking zone cool down before using Thermal ProtectionOverheating of Cooking Zone Induction Cooking Zone Minimum Pan Diameter Recommended Induction Cooking SystemCookware for Induction Cooking 80 mmHow To Turn the Touch Control on and OFF Switching onSwitching OFF Power Ignition and Adjustment of a Cooking Zone Afterheat in Cooking Zone/sThis function is available for the rear cooking zone only Induction Heaters Power ManagementBooster Function Rear Cooking Zone Only With the zone at the Booster levelSafety Key-Lock to Protect Children Program for Automatic Switching OFF of One Cooking Zone Press any button of the touch control to reset the timerSeconds Operation Time Limit of Cooking Zones Time LimitHours Error Code on the Display/s Display/s OFF or Not Correctly OperatingCleaning and Maintenance Cleaning the Ceramic HobStainless Steel Elements Side Stainless Steel Trims Tips for Installation InstallationOven with Cooling fan Min 30 mm Fastening the Cooktop Adhesive sideMains Electricity Connection Green & Yellow = Earth, Blue = Neutral, Brown = LiveConnection of the Power Supply Cable Feeder Cable SectionType H05RR-F Appliance Servicing Contact Telephone NumbersPage Cod ß5