21
Connection of the Power Supply Cable
Unhook the terminal board cover by inserting a screwdriver into the two hooks A (fig. 8).
Open the cable gland by unscrewing screw F (fig. 9), unscrew the terminal screws and remove the cable. The new supply cable, of suitable type and section, is connected to the terminal board following the diagram of fig. 10.
A |
Fig. 8 |
Feeder Cable Section
Type H05RR-F
230 V~ 3 x 1.5 mm2
F
Fig. 9
230 V 
E |
|
| Earth |
|
| ||
N |
|
| Neutral |
L |
|
| Live |
L N
E
Fig. 10