CDA HVC 32 manual Fast Automatic Heating of the Cooking Zones, Cancelling the Heat-Up Function

12

Fast Automatic Heating of the Cooking Zones

This function permits fast heating up at the maximum power level, followed by heating at the preset power level. The duration of the automatic fast heating up period is preset and depends on the selected power level.

To activate the heat-up function select the power level " 9 " and then touch again the key ; the luminous point at the bottom right side of the display will blink for 10 seconds. During these 10 seconds the desired power level shall be selected (between

1and 8 ). After this time a beep sounds and the luminous point remains fixed (not blinking), indicating that the heat-up function is ON.

If the power level is " 0 " or " 9 ", the heat-up function is cancelled.

If the heat-up function is activated, by pressing the key the duration of the heat-up function will be the duration of the new power level. If the new power level is " 9 ", the function is cancelled.

Cancelling the Heat-Up Function

The heat-up function can be cancelled:

–automatically (when the time expires) - a beep sounds, the luminous point goes out, the power level of the heater remains the selected power level;

–by the user - by pressing the key the function is cancelled.

Heat-Up Function Time

power level	1	2	3	4	5	6	7	8
Cooking zone
Fast	1 min.	2 min.	4 min.	5 min.	6 min.	1 min.	2 min.	2 min.
	&	&	&	&	&	&	&	&
heating time
	12 sec.	44 sec.	48 sec.	28 sec.	30 sec.	12 sec.	44 sec.	44 sec.