How to Use the Touch-Control

Notes:

–Each selection (by pressing one of the keys) is indicated by an acoustic signal (beep).

–If the environmental light conditions are excessive (e.g. halogen hood

light/s on), the user interface operation could be stopped (the displays show " F " and " L " alternating - error message " F L ") until the correct light conditions will be recovered.

In this case the direct environmental light/s must be switched off before operating the cooktop.

– Any time the cooktop is connected to the electrical supply or after a power failure, the safety key-lock protection will be automatically activated (indicator light ON above key ) .

Before starting to use the cooktop deactivate the key-lock protection by pressing the key .

This operation is necessary for the keyboard calibration, to adapt the sensibility of the keys (do not use gloves, use a clear finger).

–If an object is positioned on the touch control area, or in the case of spillage of liquids on control keys, the touch control is switched off automatically 10 seconds after having detected the object/liquid.

–When the touch control reaches an ambient temperature above 96°C, one heating element is switched off. This element cannot be used until the temperature falls below 89°C.