CDA HCC360 manual Cleaning and Maintenance

Page 10

5

CLEANING AND MAINTENANCE

 

GENERAL RECOMANDATION

✓Before you begin cleaning you must ensure that the hob is switched off.

It is advisable to clean when the appliance is cold and espe- cially when cleaning the enamelled parts.

✓All enamelled surfaces have to be washed with soapy water or some other non-abrasive product with a sponge and are to be dried preferably with a soft cloth.

✓Avoid leaving alkaline or acid substances (lemon juice, vine- gar etc.) on the surfaces.

ENAMELLED PARTS

✓All the enamelled parts must be cleaned with a sponge and soapy water only or other non-abrasive products.

✓Dry preferably with a chamois leather.

If acid substances such as lemon juice, tomato conserve, vinegar etc. are left on the enamel for a long time they will etch it, making it opaque.

VITROCERAMIC HOB

Before cleaning the top, make sure that it is switched off.

Remove any encrustation using a special scraper which can be bought (fig. 5.1).

Remove dust using a damp cloth.

Detergents can be used as long as they are not abrasive or cor- rosive.

All residues of detergent must be eliminated with a damp cloth.

Keep all objects that could be melted by the heat away from the top: plastic objects, aluminium foil, sugar or sugary products. If an object melts on the top, remove immediately (while the top is still hot) using the special scraper to avoid permanent damage to the pyroceram surface.

Avoid using knives and pointed objects as they could damage the surface of the top.

Also avoid using abrasive sponges or wire wool which can per- manently scratch the pyroceram surface.

STAINLESS STEEL ELEMENTS

✓Stainless steel parts must be rinsed with water and dried with a soft and clean cloth or with a chamois leather.

✓For difficult dirt, usea specific non-abrasive product available commercially or a little hot vinegar.

✓Note: regular use could cause discolouring around the burners, because of the high flame temperature.

CONTROL KNOB

✓The control knobs may be removed for cleaning but care should be taken not to damage the seal.

GLASS LID (optional)

Electric plates and gas models

✓Do not close the glass lid when the electrical plates are still hot and when the oven, installed below the cooking hob is on or still hot.

✓Do not rest hot pans or heavy objects on the cooker lid.

✓Remove any spillages from the surface of the lid before open- ing.

GAS TAPS

✓In the event of operating faults in the gas taps, call the Service Department.

CLEANING ELECTRIC HOTPLATES

✓Always clean when the hotplate is tepid.

✓Use a soft cloth, dampened with water, and a little salt. To finish off, use a soft cloth with a little oil.

✓Do not use water, to avoid the formation of rust.

Do not scratch the cooktop with cutting or sharp objects.

Do not use the cooktop as a work surface.

Do not use steam jet cleaners because the humidity could infiltrate into the appliance making it dangerous.

Fig. 5.1

29

Page 9 Page 11
Image 10
Page 9 Page 11
Contents HCC360 Domino Two Zone Ceramic Hob Tips for the User Important Precautions and RecommendationsEnglish Declaration of CE ConformityGAS Cooking HOB Fig 1FEATURESGAS triple ring burner Cooking HOB Fig Electric Cooking HOB Fig GAS Burners Lighting GAS Burners Fitted with Safety Valve DeviceGAS Cooking Hobs Valveless Electric SPARK-LIGHTING GAS BurnersGrate for Small Pans optional See fig Choice of Burner figSpecial WOK Grille optional .6 e Rapid Hotplate red dot Electric Cooking HobsNormal Hotplate Proper USE of the Electric Hotplate figCircuiti radiant zones Fig Vitroceramic HobsTypes of Cooking Area Hi-light radiant zones FigType of cooking Hints for Safe USE of the HobsCleaning and Maintenance Burners and Grids Correct Replacement of the BurnersTriple Ring Burner Technical Information for the Installer 6INSTALLATIONGAS Cooking Hobs Choosing Suitable Surroundings for gas models With Cupboard Doors figFastening the Cooktop fig Discharging Products of CombustionElectrical Plates and Vitroceramic Cooking Hobs Fastening the Cooktop GAS Connections GAS SectionGases Regulating the Burner Minimum Setting Operations to be Performed When Substituting the InjectorsLubricating the GAS Taps Electrical Section DetailsRepairs Feeder Cable SectionReparações Parte EléctricaLigação À Rede Eléctrica Secção DOS Cabos DE AlimentaçãoCod

HCC360 specifications

CDA HCC360 is a robust cloud-based solution designed to enhance healthcare management by integrating comprehensive patient data and streamlining workflows. This innovative platform is especially beneficial for healthcare providers looking to improve care delivery through advanced technologies.

One of the key features of CDA HCC360 is its ability to aggregate data from multiple sources, creating a complete view of patient health. This includes electronic health records (EHRs), lab results, and imaging data, providing clinicians with real-time access to vital information. This comprehensive data integration not only enhances decision-making but also helps in identifying care gaps and improving patient outcomes.

CDA HCC360 also utilizes advanced analytics to propel healthcare insights. Through predictive analytics, healthcare providers can analyze trends in patient data, allowing for proactive intervention rather than reactive measures. This capability is essential for risk stratification and for developing personalized treatment plans tailored to individual patient needs.

The platform is built with user experience in mind, featuring an intuitive interface that simplifies navigation. Healthcare professionals can quickly access the information they need, reducing the time spent on administrative tasks and allowing them to focus more on patient care.

Interoperability is another fundamental trait of CDA HCC360. The system supports seamless data exchange across different healthcare systems, ensuring that information flows smoothly between providers, specialists, and facilities. This connectivity is crucial for coordinated care, especially for patients with complex medical histories.

Data security and compliance are top priorities for CDA HCC360. The platform adheres to stringent regulatory standards, including HIPAA, to protect patient information. Robust encryption methods and access controls further safeguard sensitive data from unauthorized access.

Another significant characteristic of CDA HCC360 is its scalability. Whether a small practice or a large healthcare institution, the platform can grow with the needs of the organization, making it a versatile choice for various healthcare settings.

In conclusion, CDA HCC360 stands out as a comprehensive healthcare management solution, combining data integration, advanced analytics, user-friendly design, interoperability, security, and scalability. These features position it as a valuable tool for healthcare providers aiming to enhance care quality and operational efficiency.
Top Page Image Contents