Briggs & Stratton 270962, 271172 Replace Bearings, Replace DU Bearings, Magneto Bearing Tools

replace the affected cylinder, crankcase cover, or sump (Figure 6).

NOTE: Standard and reject sizes for the main bearings are shown in Section 12 - Engine Specifications.

Figure 6

Replace Bearings

Replace DU™ Bearings

1.Select tools needed from Figure 7 and Figure 8.

	Magneto Bearing Tools
	Model	Bushing	Cylinder
	Series	Driver	Support
9	110000	19124	19123
	120000
	All
	150000	19124	19123
	H/S
	210000	19179	19227
	H/S
	210000	19450	19351
	V/S
	280000	19450	19227
	V/S
	310000	19450	19227
	V/S
	330000	19350	19351
	V/S

Figure 7

	PTO Bearing Tools
Model		Bushing	Cylinder
Series		Driver	Support
110000		Replace Crankcase Cover
120000		or Sump
All
150000		Replace Crankcase Cover
H/S
210000		19179	19227
H/S
210000		Replace Sump
V/S
280000		Replace Sump
V/S
310000		Replace Sump
V/S
330000		Replace Sump
V/S

Figure 8

2.Remove and discard oil seal for bearing to be repaired.

NOTE: Before removing oil seal(s) note and record the depth of the oil seal from mounting surface so that the new seal is installed to the same depth.

3.Insert bushing driver tool (A, Figure 9) into bearing from oil seal side. Place a reference mark (B) on driver to indicate proper depth when installing the new bearing.

Figure 9

4.Place cylinder support tool (C, Figure 10) under cylinder or cover/sump bearing (B). Press driver until bearing is extracted.

128