Briggs & Stratton 270962, 271172, CE8069, 276535, 273521 manual Install Crankcase Cover or Sump

Install Crankcase Cover or Sump

1.Using a new gasket install crankcase cover or sump using seal protectors. Do not force cover or sump on cylinder.

NOTE: It may be necessary to rotate crankshaft to get oil pump (if equipped) to engage drive slot in camshaft. For horizontal crankshafts, it may be necessary to rotate idler gear to mesh with timing gear when installing cover.

2.Install screws in sequence shown in Figures 9, 10, 11, and 12.

•Figure 9 - Horizontal shaft models 120000, 150000, 200000, 210000

•Figure 10 - Vertical shaft models 97700, 99700

•Figure 11 - Vertical shaft models 120000, 210000

•Figure 12 - Vertical shaft models 280000, 310000, 330000

3.Torque to values listed in Section 12 - Engine Specifications.

Figure 11

10

Figure 9

Figure 10

Figure 12

NOTE: Screws assembled at position 4, Figure 10 and position 9, Figure 12 were coated with sealant. If sealant is missing, coat with a non- hardening sealant such as Permatex® 2, or equivalent.

138