YOUR vitapur® WATER DISPENSER
1.Bottle support collar
2.
Red: “flashing” Heater (hot tank) is in operation
"on” The hot water has reached optimum temperature and is ready for dispensing
"off" Heater (hot tank) is off, however remaining water within the tank still
may be hot, always exercise caution when dispensing and/or draining water from the hot water tank.
Blue: "on" The cold water has reached optimum temperature and is ready for dispensing
"off" The cooling cycle is in progress, it is possible to dispense water during the cooling cycle, however, optimum cooling temperature may not yet be achieved.
3.
NOTE: This button is designed to be recessed inside the cabinet.
4.Hot water push button (also dispenses room
temperature water when
5.Childproof safety switch
6.Cold water push button
7.Removable drip tray
8.Power switch (rear of dispenser)
9.Hot water drain valve (bottom of dispenser)
10. Cold water drain valve (bottom of dispenser)
18
3 
2
4 | 6 |
|
|
| |
5 | 9 |
|
| 10 | |
|
|
7 | bottom of dispenser |
|
2