Greenway Home Products VWD2636BLK-1, VWD2636RED-1 Specifications, Troubleshooting Tips, VWD2636-1

Page 9

SPECIFICATIONS

VWD2636-1

Output per hr:

Hot

1.3 gal / 5.0 L

 

Cool

0.1 gal / 0.4 L

 

 

 

Internal Tank Capacity:

Hot

0.16 gal / 0.6 L

 

Cool

0.2 gal / 0.8 L

 

 

 

Heating Temp (approx.):

 

201°F / 91°C

 

 

 

Cooling Temp (approx.):

 

42.8°F - 46.4°F / 6°C - 8°C

 

 

 

Power Consumption (Watts):

Hot

1200 W

 

Cool

65 W

 

 

 

Power Consumption (Amps):

Hot

10.5 A

 

Cool

1 A

 

 

 

Voltage

 

120 V

 

 

 

WARNING: The Water Dispenser heats and dispenses water to 201˚ F / 91˚ C which can cause severe burns or scalding.

DO NOT ALLOW CHILDREN TO USE THE HOT WATER DISPENSING BUTTON WITHOUT PROPER AND DIRECT SUPERVISION.

Child Resistant

Safety Switch

TROUBLESHOOTING TIPS

Problem

Possible Cause

Suggested Solution

Water dispenser

Small pin hole or crack in the bottle, (common with

Conduct water bottle leak test outlined

is leaking

recycled water bottles).

on page 4.

 

Drain caps are not secure.

Ensure drain caps are secure.

 

Water was poured directly into bottle support collar

Drain by pressing dispenser buttons.

 

and overflowed.

 

 

Possible air pocket.

Press several times to relieve air pocket and release

 

 

to re-set valve.

Water is not hot All the water in the tank has been used. or cold enough

The unit is unplugged.

Insta-HOT*Feature was not activated.

The circuit breaker in your home is tripped or the fuse has blown.

Replace with full bottle and wait; 60 minutes for water to cool, 3 minutes for water to heat (after activating Insta-HOT*feature button).

Plug it into the outlet.

Activate Insta-HOT*Feature by pressing the button.

Reset the breaker or replace the fuse.

Water dispenser Empty water bottle.

Replace with full bottle and wait; 60 minutes for water

is not dispensing

to cool, 3 minutes for water to heat (after activating

water

Insta-HOT*feature button).

Mineral deposits clogging tanks.

See Cleaning the Inside of the Dispenser.

Possible air pocket.

Push down on the dispenser buttons to prime the

 

unit.

 

 

Water dispenser Bottle making a gurgling noise as it fills the tank.

This is normal.

is noisy

 

Water dispenser is uneven.

Make sure the dispenser is on an even surface that

 

can support its full weight.

Attention: Do not return this product to the store. For questions on operation, assembly or parts, please contact us at www.greenwayhp.com or 1-866-253-0447.

8

Image 9
Contents Water Dispenser Distributeur d’eau Important Safeguards Grounding InstructionsSee Grounding Instructions Your vitapur Water Dispenser Initial Product Cleaning Procedure Installing the Water BottleOperating Instructions See Dispensing Hot Water, pg IMPORTANT NOTICE ABout leaking bottlesCleaning and Maintenance Cleaning the Outside of the Water Dispenser Cleaning Your Water DispenserCleaning the Drip Tray Draining the ReservoirsCleaning the Inside of the Dispenser Drain the reservoirs see Draining the Reservoirs, pgGoing Away on Vacation Specifications Troubleshooting TipsVWD2636-1 See Important Notice About Leaking Bottles, pg Frequently Asked Questions