Greenway Home Products VWD2636BLK-1, VWD2636RED-1, VWD2636W-1 manual Cleaning and Maintenance

Page 6

Dispensing Room and Cold Water

Place a glass under the spigot. For cold water, press the button downward until the desired

amount of water is dispensed. Before the Insta-HOT*Feature is activated, the button

dispenses room temperature water. To dispense room water, press the button downward until the desired amount of water is dispensed (for hot water, see Dispensing Hot Water).

Temperature Setting

The water temperatures (hot and cold) are factory set and cannot be adjusted.

Dispensing Hot Water

NOTE: The Insta-HOT* feature button is designed to be recessed inside the cabinet.

The hot water (Insta-HOT*feature) dispensing system on this unit is designed to save energy and money. Conventional hot water dispensing systems operate 24/7 regardless of water usage. The (on demand) Insta-HOT*feature activates the hot water system "only" when the Insta-HOT*feature button is activated delivering steaming hot water in less than 3 minutes.

To dispense hot water, first press the Insta-HOT*Feature activation button. The red indicator light will begin flashing to indicate that the water heater is active. In approximately 3 minutes the set temperature point will be reached and the red light will stop flashing and remain on. The water is

now ready to be dispensed; press down on the button until the desired amount of water is dispensed, then release the button. If water is not immediately dispensed, the water will begin to cool and the red light will shut off, requiring you to initiate another cycle.

Child Resistant Safety Switch

To prevent hot water from accidentally harming a child, the hot water dispenser button has a safety switch on it. Slide the switch to the left and push the button down to dispense hot water.

DANGER: The hot water is heated to approximately 201˚F / 91˚C. Temperatures above 125˚F / 52˚C can cause severe burns from

scalding. DO NOT ALLOW CHILDREN TO USE THE HOT WATER

DISPENSING BUTTON WITHOUT PROPER AND DIRECT SUPERVISION.

Child Resistant Safety Switch

CLEANING AND MAINTENANCE

Like most appliances, your water dispenser requires periodic maintenance for maximum efficiency and performance and must be cleaned on a regular basis (i.e. every 4 months). To maintain a hygienic environment within your water dispenser and prevent potential formation (growth) of bacteria, we strongly recommend regular cleaning. A cleaning kit is available through our Customer Service Department at 1-866-253-0447or can be ordered on line at www.greenwayhp.com.

5

Image 6
Contents Water Dispenser Distributeur d’eau Important Safeguards Grounding InstructionsSee Grounding Instructions Your vitapur Water Dispenser Initial Product Cleaning Procedure Installing the Water BottleOperating Instructions IMPORTANT NOTICE ABout leaking bottles See Dispensing Hot Water, pgCleaning and Maintenance Cleaning the Drip Tray Cleaning Your Water DispenserCleaning the Outside of the Water Dispenser Draining the ReservoirsCleaning the Inside of the Dispenser Drain the reservoirs see Draining the Reservoirs, pgGoing Away on Vacation Specifications Troubleshooting TipsVWD2636-1 Frequently Asked Questions See Important Notice About Leaking Bottles, pg