UL requirements

Installation, cont’d

Ve
nt	Space
Ve	Space
Ve
nt	Space
Ve	Space	Ve
Ve		nt
nt	Space		Space
nt
Ve
Ve		Ve
nt	Space	Ve
	Space	nt
			Space

Allow sufficient spacing for adequate ventilation

Flexible conduit adapter kit installation

WThe circuit breaker used for this connection should be rated no lower than 20 amps and no greater than 30 amps.

WThis unit must be installed in accordance with the National Electrical Code and with all local codes. An ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in each pole shall be incorporated in the electrical installation of the building. The installation shall be carried out in accordance with all applicable installation rules.

WInstallation and service must be performed by a qualified electrician only.

CA UL listed electrical distribution box is recommended for the termination of the conduit opposite the XPA. See the following "UL requirements" section.

The optional Flexible Conduit Adapter Kit (Extron part #70-228-02) consists of

•One EMT adapter plate

•One 6-foot long electrical conduit

•Three 7.5 feet, 18-gauge spade connector power wires

•One UL rated zip tie wrap

•Three auxiliary crimp style spade connectors designed for 14- to 16-gauge wires

NIf needed, Extron recommends using a UL-rated crimp tool to terminate the spade connectors. One recommended

choice is the Molex crimp tool (Molex part #19285-0008).

The kit provides a convenient means to replace the XPA's IEC power cord with conduit, where required by local codes.

CMake sure that the source device and the XPA are turned off and disconnected from the power source before you begin.

The Underwriters Laboratories (UL) requirements listed below pertain to the installation of the flexible conduit onto a XPA 1002 or XPA 2001.

•This unit is not to be used beyond its rated voltage range.

•This unit must be wired to a UL listed distribution box.

NThe UL approved electrical distribution box is not included with either the XPA or the Flexible Conduit Adapter Kit; the installer is responsible for obtaining and installing the box.

Installing the flexible conduit kit

Install flexible conduit to the XPA by following the steps below. 1. Unplug the IEC power cord from the power amplifier.

2. Remove the 8 screws from the top and sides of the XPA and lift off the cover. See the following illustration.

CElectrostatic discharge (ESD) can damage IC chips even though you cannot feel it. You must be electrically grounded before touching anything inside the XPA. A grounding wrist strap is recommended.

2-6

XTRA Series • Installation

2-7

XPA 1002, XPA 2001100V, XPA 200170V, XTRA SERIES specifications

The Extron XTRA Series is designed to redefine performance in the realm of AV system control and signal processing. This extensive lineup comprises high-quality products that cater to the demands of modern AV environments, ensuring seamless integration and exceptional functionality.

One of the hallmark features of the XTRA Series is its advanced signal routing capabilities. With support for a variety of audio and video formats, including HDMI, HDBaseT, and analog signals, users can easily manage and distribute content across multiple displays and zones. This versatility is crucial for settings such as educational institutions, corporate environments, and large venues where different types of media are routinely used.

A standout characteristic of the XTRA Series is its robust control capabilities. The series incorporates Extron's signature GlobalViewer Enterprise software, enabling users to monitor and manage AV devices remotely. This feature not only simplifies system administration but also enhances troubleshooting efficiency, allowing technicians to quickly identify and resolve issues without needing to be physically present.

In terms of technology, the XTRA Series is built on Extron's advanced DSP (Digital Signal Processing) platform. This ensures superior audio quality, with features like automatic gain control, equalization, and feedback suppression, which are essential for delivering clear and articulate sound in any environment. Additionally, the series includes built-in video scaling and switching technologies, allowing for high-resolution output that maintains the integrity of the original media.

Another important aspect of the XTRA Series is its user-friendly interface. Many products in this lineup are designed with customizable touch panels and intuitive control systems that can be tailored to meet the specific needs of various users. This adaptability makes it easy for anyone, regardless of technical expertise, to operate and manage AV systems effectively.

The XTRA Series is also designed with reliability in mind. With durable construction and rigorous testing processes, these products are built to perform consistently in high-demand environments. This reliability is further complemented by Extron's dedicated customer support, providing users with the assistance and resources needed to maximize their system's capabilities.

Overall, the Extron XTRA Series stands as a testament to innovation in AV technology, combining sophisticated signal processing, intuitive control, and exceptional reliability to provide comprehensive solutions for a wide array of applications. Whether for corporate environments, educational facilities, or large-scale events, the XTRA Series ensures that users enjoy a seamless and enriched audio-visual experience.