Extron electronic XPA 2001100V, XTRA SERIES, XPA 200170V Introduction, About this Manual, Features

Page 6

Introduction

About this Manual

This manual contains information about the Extron's XTRA Series of power amplifiers: the XPA 1002 two-channel stereo audio power amplifier and the XPA 2001 mono audio power amplifier. The XPA 1002 outputs 60 watts per channel at 8 ohms and 100 watts per channel at 4 ohms. The XPA 2001 offers two models: the XPA 2001-70V and the XPA 2001-100V. The XPA 2001-70V outputs 200 watts (70 V line mono), and the XPA 2001- 100V outputs 200 watts (100 V line mono).

Terms used in this manual

The terms “amplifier” and “power amplifier” are used interchangeably in this manual to refer to all of the XPA models. XPA 2001 refers to both the XPA 2001-70V and the XPA 2001-100V.

Features

Inputs — Balanced or unbalanced stereo on a captive screw connector.

Speaker Outputs — Screw-lock, 5 mm captive screw connector.

Continuous power output for larger rooms —

•XPA 1002: 60 watts rms per channel at 8 ohms; 100 watts rms per channel at 4 ohms.

•XPA 2001-70V: 200 watts rms for 70 volt speaker systems.

•XPA 2001-100V: 200 watts rms for 100 volt speaker systems.

Professional grade amplifier design —

•Less than 0.05% Total Harmonic Distortion plus Noise

•Better than 100 dB Signal-to-Noise

ENERGY STAR® qualified amplifier — The XTRA Series of amplifiers are energy efficient products to help meet green building requirements for low power consumption and reduced operating costs.

Highly efficient Class D amplifier design — The XTRA Series of amplifiers generate substantially less heat than conventional amplifier designs, making them ideal for installation in equipment racks and lecterns with very limited ventilation. They consumes 10 watts when idle and less than 1 watt in standby mode.

Extron Patented CDRS™ - Class D Ripple Suppression

—A patented, exclusive technology from Extron that

eliminates the high frequency switching ripple and EMI emissions found in typical Class D amplifiers. CDRS enables Extron power amplifiers to be situated near wireless A/V devices without RF interference.

Convection cooled — The XTRA Series of amplifiers are convection cooled without the need for fans, ensuring quiet, reliable operation.

Plenum rated when used with optional Flexible Conduit Adapter Kit, part # 70-228-02 — The amplifiers meet UL 2043 for smoke and heat release for installation within a plenum airspace above a drop ceiling.

Auto-standby with fast power-up — The amplifiers automatically enter into a standby mode after one hour of inactivity, dramatically reducing power consumption. It quickly returns to full power status upon signal detection.

Rear panel level controls — Provide attenuation of input signals for setting proper audio system gain staging as well as two-zone applications. They are located on the rear panel to prevent unauthorized or accidental tampering of the level adjustments.

Multiple protection circuits — Activate during excessive clipping, thermal overload, or DC faults to prevent damage to the amplifier and speakers.

Remote standby port — Enables the amplifiers to be remotely powered down when not in use, reducing operating cost.

Remote volume and mute control port — This port allows the amplifiers to be remotely controlled using the optional Extron VCM 100 Series volume and mute or VC 50 volume controllers.

Screw lock, 5 mm captive screw speaker connectors — Enables simple, secure connections with 22 to 14 AWG speaker

cables.

Front and rear-mounted signal and protection indication LEDs

—Provide convenient indication of amplifier operation from both sides of an equipment rack.

Internal international power supply — The 100-240VAC,50-60 Hz, universal power supply provides worldwide power compatibility.

1-2

XTRA Series • Introduction

XTRA Series • Introduction

1-3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Audio Power Amplifiers Half-Rack 2-Channel and Mono ChannelPrecautions Extron’s WarrantyEnglish Consignes de Sécurité Français Table of Contents Table of Contents, cont’d IntroductionXtra Series About this Manual FeaturesIntroduction Terms used in this manualInstallation Introduction, cont’dMounting the XPA 1002 and XPA InstallationApplication Examples Tabletop useInstallation, cont’d Rack mountingSide by repeating steps 1 through Flexible conduit adapter kit installation UL requirementsNeutral Replace the cover of the XPA by attaching the 8 screws thatThree OperationOver Temp indicator LED This LED lights red when Front Panel Features and OperationPower indicator LED This LED lights Limiter/Protect indicator LEDs channels 1 and 2 TheseInput signal is detected on the corresponding channel Operation, cont’d Rear Panel Features and OperationSignal indicator LEDs channels 1 and 2 These LEDs Level adjustment channels 1 and 2 Use a Tweeker orRemote control connector The 3.5 mm 5-pin captive screw To adjust the XPA amplifiers input level, do the followingSet the source devices volume to its maximum volume Operation, cont’dStereo audio output connector channels 1 and 2 Marked 2 for the output channels, wire the included 4-poleUnplug the IEC power cord from the power amplifier Remote volume controlHigh pass filter toggle switch Use a Tweeker or small Bridged mono outputWire the input as shown in the following diagram ReferenceXtra Series Specifications, Part Numbers, and Accessories SpecificationsSpecifications, Part Numbers, Accessories, cont’d GeneralOptional Accessories Specifications, Part Numbers, Accessories, cont’d Specifications, Part Numbers, Accessories, cont’d
Related manuals
Manual 28 pages 30.34 Kb

XPA 1002, XPA 2001100V, XPA 200170V, XTRA SERIES specifications

The Extron XTRA Series is designed to redefine performance in the realm of AV system control and signal processing. This extensive lineup comprises high-quality products that cater to the demands of modern AV environments, ensuring seamless integration and exceptional functionality.

One of the hallmark features of the XTRA Series is its advanced signal routing capabilities. With support for a variety of audio and video formats, including HDMI, HDBaseT, and analog signals, users can easily manage and distribute content across multiple displays and zones. This versatility is crucial for settings such as educational institutions, corporate environments, and large venues where different types of media are routinely used.

A standout characteristic of the XTRA Series is its robust control capabilities. The series incorporates Extron's signature GlobalViewer Enterprise software, enabling users to monitor and manage AV devices remotely. This feature not only simplifies system administration but also enhances troubleshooting efficiency, allowing technicians to quickly identify and resolve issues without needing to be physically present.

In terms of technology, the XTRA Series is built on Extron's advanced DSP (Digital Signal Processing) platform. This ensures superior audio quality, with features like automatic gain control, equalization, and feedback suppression, which are essential for delivering clear and articulate sound in any environment. Additionally, the series includes built-in video scaling and switching technologies, allowing for high-resolution output that maintains the integrity of the original media.

Another important aspect of the XTRA Series is its user-friendly interface. Many products in this lineup are designed with customizable touch panels and intuitive control systems that can be tailored to meet the specific needs of various users. This adaptability makes it easy for anyone, regardless of technical expertise, to operate and manage AV systems effectively.

The XTRA Series is also designed with reliability in mind. With durable construction and rigorous testing processes, these products are built to perform consistently in high-demand environments. This reliability is further complemented by Extron's dedicated customer support, providing users with the assistance and resources needed to maximize their system's capabilities.

Overall, the Extron XTRA Series stands as a testament to innovation in AV technology, combining sophisticated signal processing, intuitive control, and exceptional reliability to provide comprehensive solutions for a wide array of applications. Whether for corporate environments, educational facilities, or large-scale events, the XTRA Series ensures that users enjoy a seamless and enriched audio-visual experience.
Top Page Image Contents