GE GNSV70FBL owner manual Optional Home INSTALLATION-SADDLE Valve, Optional Installation

Page 7

Installation Instructions.

Feed Water Adapter and Supply Valve

4.Assemble adapter (C) and coupling (D) as shown in Fig. 1, per your configuration. Be sure the gaskets (G) are in place before final assembly. Start installation by hand, then finish tightening with adjustable wrench. Be careful not to overtighten or cross thread as damage to threads may occur.

Note Adapter (C) orientation:

1/2-inch Installation—Rounded end of adapter (C) connects to coupling (D), then to existing faucet tubing (B). 3/8-inch Installation—Rounded end of adapter (C) connects to supply valve (A).

5.Hand tighten assembled adapter (C) onto supply valve (A) for the proper size installation. Be sure the gaskets (G), as shown in Fig. 1, are in place before final assembly. Finish tightening with adjustable wrench. Be careful not to overtighten or cross thread as damage to threads may occur.

NOTE: If inlet valve needs to be removed to complete this step, refer to D. Removal and Reinstallation of Inlet Valve on page 8.

6.Reconnect faucet tubing line (B) to top of adapter (C).

7.Remove nut and ferrule from end of inlet valve. Using the 4 feet of tubing provided, place the nut (I) and ferrule (H) onto the tubing and install onto inlet valve (F) as shown in Fig. 2. Tighten with adjustable wrench.

NOTE: Inspect the ends of the tubing to be sure there are no imperfections and end of tubing is cut square. It may be necessary to cut the tubing again.

B.OPTIONAL HOME INSTALLATION—SADDLE VALVE

(Where codes permit): Saddle valve must be able to connect with 1/4-inch tubing supplied with system.

Not supplied with product; check your local hardware or home service store for product.

For 1/2″ OD or larger metal tubing only.

NOTE: Codes in the state of Massachusetts require installation by a licensed plumber and do not permit the use of the saddle valve. For installation, use plumbing code 248-CMR of the Commonwealth of Massachusetts.

1.Turn off the cold water supply and install saddle valve as required by product selection. (Be sure to follow manufacturers’ installation instructions.)

DANGER: If hole is required to be drilled in pipe, to protect yourself from serious injury or fatal shock, use a battery powered hand drill only to make the hole. DO NOT USE AN ELECTRIC DRILL.

Open only after complete system has been installed.

C.OPTIONAL INSTALLATION

(For installation with rigid pipe between supply valve and sink faucet)

Option 1

1.Remove pipe from supply valve and sink faucet.

2.Obtain flexible pipe sized to your plumbing.

3.Install flexible pipe to sink.

4.Go back to A. Preferred Installation section step 4.

Option 2

1.Obtain compression fittings to fit rigid pipe.

2.Obtain any other fittings required to connect compression fittings to adapter.

NOTE: Adapter has 1/2-inch and 3/8-inch internal and external threads.

3.Remove pipe from supply valve.

4.Cut pipe to fit length of assembled fittings and adapter.

5.Install compression fitting to pipe.

6.Go back to A. Preferred Installation section step 4.

NOTE: Above described materials are not included with the product.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 184D1069P002 Water Filtration SystemRead and Follow this Safety Information Carefully Models GNSV70FBL and GNSV75FWW Specifications GuidelinesInstallation Overview Water Filtration System Uses the Following CanistersIowa Residents only Performance Data SheetContents Included with the Product Installation InstructionsImportant Installation Recommendations Tools and Materials Required for InstallationFor 1/2-inch and 3/8-inch installations Preferred InstallationFeed Water Adapter and Supply Valve Optional Installation Optional Home INSTALLATION-SADDLE ValveOption NUT END of Valve AS Leak MAY Occur Faucet Spout Installations see ,On HEX NUT END of Valve AS Leak MAY Occur Installation Steps refer to for clarification Faucet InstallationScrew Installation Mounting System InstallationMounting System to Screws Installed in Wall Installing the Tubing Battery Installation Replacement Filter Canisters/Estimated Replacement Costs System Startup ProcedureReplacing the Filter Canisters Procedure for flushing the GE Water Filtration system is Flush ProcedureCircumstances that may require flushing the system are Before you call for service… General Electric parts catalog Parts ListWarrantor General Electric Company. Louisville, KY GE Water Filtration System WarrantyFor The Period Of GE Will Replace What GE Will Not CoverPage Real Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances Website

GNSV70FBL specifications

The GE GNSV70FBL is a state-of-the-art switchgear product designed specifically for medium-voltage applications. This model is part of General Electric's robust line of solutions aimed at enhancing electrical distribution networks across various industrial environments. The GNSV70FBL is particularly notable for its combination of efficiency, reliability, and safety features, making it an optimal choice for users who prioritize performance and durability in their electrical systems.

One of the standout features of the GNSV70FBL is its compact design. This switchgear is engineered with a reduced footprint, allowing for efficient space utilization, which is crucial for facilities with limited physical space. The compact design not only simplifies installation but also facilitates maintenance activities, enabling technicians to perform their duties with greater ease.

The GNSV70FBL incorporates advanced digital technology and automation capabilities. It is equipped with intelligent electronic devices (IED) that provide real-time monitoring and control. This technological integration enhances operational efficiency by enabling predictive maintenance, which reduces downtime and operational costs. Users can benefit from enhanced data analytics, allowing for informed decision-making regarding their electrical distribution systems.

Safety is a paramount concern in any electrical application, and the GNSV70FBL addresses this with its robust design and protective features. It is equipped with fault detection capabilities that promptly identify and isolate issues within the network, minimizing the risk of equipment damage and ensuring the safety of personnel. The switchgear also complies with rigorous international safety standards, providing users with peace of mind.

In terms of versatility, the GNSV70FBL supports a range of configurations and customization options. This flexibility allows it to be tailored to meet the specific requirements of diverse applications, from manufacturing plants to commercial buildings. The GNSV70FBL offers compatibility with various voltage ratings, enabling it to seamlessly integrate into existing electrical infrastructures.

Additionally, the GNSV70FBL is designed for sustainable operation. Its energy-efficient components contribute to lower overall energy consumption, aligning with global initiatives for reducing carbon footprints. This focus on sustainability makes the GNSV70FBL not only a reliable choice but also an environmentally responsible one.

Overall, the GE GNSV70FBL stands out in the medium-voltage switchgear market with its advanced features, compact design, and commitment to safety and sustainability. For industries seeking high-performance solutions for their electrical distribution needs, the GNSV70FBL represents an excellent investment in both innovation and reliability.
Top Page Image Contents