Faucet Installation

Installation Instructions.

Be sure there is room underneath and above the sink to make the needed connections. Before starting, make sure there is sufficient room for the battery powered faucet base. Select one of the following places to install the faucet:

1.In an existing sink spray attachment or soap dispenser hole.

2.In a hole to be drilled in the sink top.

3.In a hole to be drilled in the countertop, next to the sink.

NOTE: Be sure the faucet base will fit flat against the surface at the selected location so the bottom gasket between the base and surface area will seal.

Installation Steps (refer to Fig. 4 for clarification)

1.If drilling is needed, make a 3/4″ diameter hole.

Be sure to use the proper procedure for drilling porcelain or stainless steel. Special drill bits may be needed. Consult a qualified plumber for the proper procedure.

2.Remove the faucet with pre-installed tubing, thin o-ring (D), faucet base (E), bottom base gasket (F), lock washer (G), hex nut (H) and mounting bracket (I) from the packaging.

3.Feed tubing connected to the faucet through the thin o-ring (D), faucet base (E), bottom base gasket (F), lock washer (G) and hex nut (H).

4.Thread the hex nut (H) up the stem of the faucet until the height between the bottom of the base gasket (F) and top of the lock washer (G) is slightly larger than the thickness of the mounting surface (J).

5.Lower the faucet assembly into place in the mounting hole and orient to final position. Place the mounting bracket (I) above the lock washer (G) around the faucet stem (Fig. 5). While holding the mounting bracket in place, securely tighten the hex nut.

NOTE: Two people may be required to complete this step.

(A) Spout

(B) Faucet body

(D) O-ring

(E) Faucet base

(G) Lock washer

(F) Gasket

(H) Hex nut

Fig. 5

(J) Mounting surface

(I)Mounting bracket

Fig. 4

GNSV70FBL specifications

The GE GNSV70FBL is a state-of-the-art switchgear product designed specifically for medium-voltage applications. This model is part of General Electric's robust line of solutions aimed at enhancing electrical distribution networks across various industrial environments. The GNSV70FBL is particularly notable for its combination of efficiency, reliability, and safety features, making it an optimal choice for users who prioritize performance and durability in their electrical systems.

One of the standout features of the GNSV70FBL is its compact design. This switchgear is engineered with a reduced footprint, allowing for efficient space utilization, which is crucial for facilities with limited physical space. The compact design not only simplifies installation but also facilitates maintenance activities, enabling technicians to perform their duties with greater ease.

The GNSV70FBL incorporates advanced digital technology and automation capabilities. It is equipped with intelligent electronic devices (IED) that provide real-time monitoring and control. This technological integration enhances operational efficiency by enabling predictive maintenance, which reduces downtime and operational costs. Users can benefit from enhanced data analytics, allowing for informed decision-making regarding their electrical distribution systems.

Safety is a paramount concern in any electrical application, and the GNSV70FBL addresses this with its robust design and protective features. It is equipped with fault detection capabilities that promptly identify and isolate issues within the network, minimizing the risk of equipment damage and ensuring the safety of personnel. The switchgear also complies with rigorous international safety standards, providing users with peace of mind.

In terms of versatility, the GNSV70FBL supports a range of configurations and customization options. This flexibility allows it to be tailored to meet the specific requirements of diverse applications, from manufacturing plants to commercial buildings. The GNSV70FBL offers compatibility with various voltage ratings, enabling it to seamlessly integrate into existing electrical infrastructures.

Additionally, the GNSV70FBL is designed for sustainable operation. Its energy-efficient components contribute to lower overall energy consumption, aligning with global initiatives for reducing carbon footprints. This focus on sustainability makes the GNSV70FBL not only a reliable choice but also an environmentally responsible one.

Overall, the GE GNSV70FBL stands out in the medium-voltage switchgear market with its advanced features, compact design, and commitment to safety and sustainability. For industries seeking high-performance solutions for their electrical distribution needs, the GNSV70FBL represents an excellent investment in both innovation and reliability.