GE GNSV70FBL owner manual Installation Instructions, Important Installation Recommendations

Page 5

Performance Data Sheet.

 

Organic Chemicals Reduced by Chloroform Surrogate Testing

 

 

Avg.1

Max.

Contaminant

Influent (µg/L)2

Effluent (µg/L)2

Alachlor

50

1.03

Atrazine

100

3.03

Benzene

81

1.03

Carbofuran

190

1.03

Carbon Tetrachloride

78

1.84

Chlorobenzene

77

1.03

Chloropicrin

15

0.24

2,4-D

110

1.74

Dibromochloropropane (DBCP)

52

0.023

o-Dichlorobenzene

80

1.03

p-Dichlorobenzene

40

1.03

1,2-Dichloroethane

88

4.85

1,1-Dichloroethylene

83

1.03

cis-1,2-Dichloroethylene

170

0.53

trans-1,2-Dichloroethylene

86

1.03

1,2-Dichloropropane

80

1.03

cis-1,3-Dichloropropylene

79

1.03

Dinoseb

170

0.24

Endrin

53

0.594

Ethylbenzene

88

1.03

Ethylene Dibromide (EDB)

44

0.023

Haloacetonitriles (HAN):

 

 

Bromochloroacetonitrile

22

0.54

Dibromoacetonitrile

24

0.64

Dichloroacetonitrile

9.6

0.24

Trichloroacetonitrile

15

0.34

1Influent challenge levels are average influent concentrations determined in surrogate qualification testing.

2µg/L means Micrograms Per Liter.

3Maximum product water level was not observed but was set at the detection limit of the analysis.

4Maximum product level is set at a value determined in surrogate qualification testing.

5Chemical reduction percent and maximum product water level calculated at chloroform 95% breakthrough point as determined in surrogate qualification testing.

6The surrogate test results for heptachlor Epoxide demonstrated a 98% reduction. These data were used to calculate an upper occurrence concentration, which would produce a maximum product water level at the MCL.

Testing was performed under standard laboratory conditions; actual performance may vary.

NOTE: Substances reduced are not necessarily in your water. Filter must be maintained according to manufacturer’s instructions, including replacement of filter cartridges.

WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that contain filterable cysts.

Installation Instructions.

Important Installation Recommendations

WARNING: Read entire manual. Failure to follow all guides and rules could cause personal injury or property damage.

■Check with your local public works department for plumbing codes. You must follow their guides as you install the Water Filtration system.

Tools and Materials Required for Installation

•Phillips screwdriver

•Two (2) adjustable wrenches

•Electric drill and drill bit to drill 3/4″ hole (type as required) if mounting hole is needed for faucet

•1/16″ drill bit (optional for pilot holes)

•Tape measure

•If your main water line is a rigid pipe, you will require a compression fitting and possibly other plumbing hardware to complete the installation.

CAUTION: To avoid damaging the sink, consult a qualified plumber or installer for drilling procedures. Special drill bits may be needed for porcelain or stainless steel.

Contents Included with the Product

•Water filter system assembly, including mounting screw

•Feed water adapter and supply valve

•Faucet assembly with electronic base monitor and tubing

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 184D1069P002 Water Filtration SystemRead and Follow this Safety Information Carefully Installation Overview Specifications GuidelinesWater Filtration System Uses the Following Canisters Models GNSV70FBL and GNSV75FWWIowa Residents only Performance Data SheetImportant Installation Recommendations Installation InstructionsTools and Materials Required for Installation Contents Included with the ProductFeed Water Adapter and Supply Valve Preferred InstallationFor 1/2-inch and 3/8-inch installations Option Optional Home INSTALLATION-SADDLE ValveOptional Installation On HEX NUT END of Valve AS Leak MAY Occur Faucet Spout Installations see ,NUT END of Valve AS Leak MAY Occur Installation Steps refer to for clarification Faucet InstallationScrew Installation Mounting System InstallationMounting System to Screws Installed in Wall Installing the Tubing Battery Installation Replacing the Filter Canisters System Startup ProcedureReplacement Filter Canisters/Estimated Replacement Costs Circumstances that may require flushing the system are Flush ProcedureProcedure for flushing the GE Water Filtration system is Before you call for service… General Electric parts catalog Parts ListFor The Period Of GE Will Replace GE Water Filtration System WarrantyWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYPage Parts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

GNSV70FBL specifications

The GE GNSV70FBL is a state-of-the-art switchgear product designed specifically for medium-voltage applications. This model is part of General Electric's robust line of solutions aimed at enhancing electrical distribution networks across various industrial environments. The GNSV70FBL is particularly notable for its combination of efficiency, reliability, and safety features, making it an optimal choice for users who prioritize performance and durability in their electrical systems.

One of the standout features of the GNSV70FBL is its compact design. This switchgear is engineered with a reduced footprint, allowing for efficient space utilization, which is crucial for facilities with limited physical space. The compact design not only simplifies installation but also facilitates maintenance activities, enabling technicians to perform their duties with greater ease.

The GNSV70FBL incorporates advanced digital technology and automation capabilities. It is equipped with intelligent electronic devices (IED) that provide real-time monitoring and control. This technological integration enhances operational efficiency by enabling predictive maintenance, which reduces downtime and operational costs. Users can benefit from enhanced data analytics, allowing for informed decision-making regarding their electrical distribution systems.

Safety is a paramount concern in any electrical application, and the GNSV70FBL addresses this with its robust design and protective features. It is equipped with fault detection capabilities that promptly identify and isolate issues within the network, minimizing the risk of equipment damage and ensuring the safety of personnel. The switchgear also complies with rigorous international safety standards, providing users with peace of mind.

In terms of versatility, the GNSV70FBL supports a range of configurations and customization options. This flexibility allows it to be tailored to meet the specific requirements of diverse applications, from manufacturing plants to commercial buildings. The GNSV70FBL offers compatibility with various voltage ratings, enabling it to seamlessly integrate into existing electrical infrastructures.

Additionally, the GNSV70FBL is designed for sustainable operation. Its energy-efficient components contribute to lower overall energy consumption, aligning with global initiatives for reducing carbon footprints. This focus on sustainability makes the GNSV70FBL not only a reliable choice but also an environmentally responsible one.

Overall, the GE GNSV70FBL stands out in the medium-voltage switchgear market with its advanced features, compact design, and commitment to safety and sustainability. For industries seeking high-performance solutions for their electrical distribution needs, the GNSV70FBL represents an excellent investment in both innovation and reliability.
Top Page Image Contents