GE GNSV70FBL owner manual Mounting System Installation, Screw Installation

Page 10

Installation Instructions.

Mounting System Installation

Pick a location under the sink to mount the system. Location should be easily accessible, with clearance between the bottom of the filter canisters and the floor or bottom of the cabinet; any less will result in difficulty of removing filter canisters (see Fig. 7). Allow enough space on either side of the system for the tubing connections.

SCREW INSTALLATION

1.Remove this template from the manual for easier installation.

2.The top of the template openings should be placed a minimum of 17 inches above the bottom of the cabinet or floor where the system is to be mounted (Fig. 6 and 7).

NOTE: Any distance lower may result in filter canisters interfering with the floor when removed.

3.Tape template to wall, then mark the wall where the screws are to be installed.

Install screws into the wall, leaving 3/16 inch clearance between the head of the screw and wall (drill pilot holes if needed) (Fig. 8).

5 inches

17 inches

Template for screw hole pattern on back of filtration system

 

 

Fig. 6

Bottom of Cabinet or Floor

5 inches

3/16 inch

Screws

17 inches

Screw

Wall

Fig. 8

Fig. 7

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Water Filtration System 184D1069P002Read and Follow this Safety Information Carefully Water Filtration System Uses the Following Canisters Specifications GuidelinesInstallation Overview Models GNSV70FBL and GNSV75FWWPerformance Data Sheet Iowa Residents onlyTools and Materials Required for Installation Installation InstructionsImportant Installation Recommendations Contents Included with the ProductFor 1/2-inch and 3/8-inch installations Preferred InstallationFeed Water Adapter and Supply Valve Optional Installation Optional Home INSTALLATION-SADDLE ValveOption NUT END of Valve AS Leak MAY Occur Faucet Spout Installations see ,On HEX NUT END of Valve AS Leak MAY Occur Faucet Installation Installation Steps refer to for clarificationMounting System Installation Screw InstallationMounting System to Screws Installed in Wall Installing the Tubing Battery Installation Replacement Filter Canisters/Estimated Replacement Costs System Startup ProcedureReplacing the Filter Canisters Procedure for flushing the GE Water Filtration system is Flush ProcedureCircumstances that may require flushing the system are Before you call for service… Parts List General Electric parts catalogWhat GE Will Not Cover GE Water Filtration System WarrantyFor The Period Of GE Will Replace Warrantor General Electric Company. Louisville, KYPage Consumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio

GNSV70FBL specifications

The GE GNSV70FBL is a state-of-the-art switchgear product designed specifically for medium-voltage applications. This model is part of General Electric's robust line of solutions aimed at enhancing electrical distribution networks across various industrial environments. The GNSV70FBL is particularly notable for its combination of efficiency, reliability, and safety features, making it an optimal choice for users who prioritize performance and durability in their electrical systems.

One of the standout features of the GNSV70FBL is its compact design. This switchgear is engineered with a reduced footprint, allowing for efficient space utilization, which is crucial for facilities with limited physical space. The compact design not only simplifies installation but also facilitates maintenance activities, enabling technicians to perform their duties with greater ease.

The GNSV70FBL incorporates advanced digital technology and automation capabilities. It is equipped with intelligent electronic devices (IED) that provide real-time monitoring and control. This technological integration enhances operational efficiency by enabling predictive maintenance, which reduces downtime and operational costs. Users can benefit from enhanced data analytics, allowing for informed decision-making regarding their electrical distribution systems.

Safety is a paramount concern in any electrical application, and the GNSV70FBL addresses this with its robust design and protective features. It is equipped with fault detection capabilities that promptly identify and isolate issues within the network, minimizing the risk of equipment damage and ensuring the safety of personnel. The switchgear also complies with rigorous international safety standards, providing users with peace of mind.

In terms of versatility, the GNSV70FBL supports a range of configurations and customization options. This flexibility allows it to be tailored to meet the specific requirements of diverse applications, from manufacturing plants to commercial buildings. The GNSV70FBL offers compatibility with various voltage ratings, enabling it to seamlessly integrate into existing electrical infrastructures.

Additionally, the GNSV70FBL is designed for sustainable operation. Its energy-efficient components contribute to lower overall energy consumption, aligning with global initiatives for reducing carbon footprints. This focus on sustainability makes the GNSV70FBL not only a reliable choice but also an environmentally responsible one.

Overall, the GE GNSV70FBL stands out in the medium-voltage switchgear market with its advanced features, compact design, and commitment to safety and sustainability. For industries seeking high-performance solutions for their electrical distribution needs, the GNSV70FBL represents an excellent investment in both innovation and reliability.
Top Page Image Contents