Anetsberger Brothers 14GS 14GU warranty Problem Cause

Page 20

FRYER TROUBLESHOOTING GUIDE (Continued)

PROBLEM

CAUSE

Pilot flame goes out

4. High-limit thermostat problem has shut off

repeatedly. (Continued)

the gas. (Continued)

!

Main burners do not

1. Gas control valve knob set to OFF or

ignite.

PILOT.

2.Low gas supply pressure [less than 6” W.C. for natural gas; (11” W.C. for pro- pane) when all other gas-powered kitchen equipment is operating].

3.Pilot burner problem.

4.Thermostat control set below the tem- perature of the liquid shortening in the kettle.

5. Gas control valve has failed.

REMEDY

4.(Continued)

For model 14GS, MX-14EG, and MX14-EGU fryers ONLY: Test the high-limit thermo- stat by disconnecting the ther- mocouple at the gas control valve. Then, disconnect the red wires to the high-limit thermo- stat from the gas control valve. Reconnect the thermocouple; next, perform the Lighting Pro- cedure, to check whether the pilot flame lights. If the pilot flame stays lit, the high-limit thermostat has failed and must be replaced.

CAUTION: DO NOT return the fryer to normal operation with its high-limit thermostat bypassed/disconnected.

1.Perform the normal Lighting Procedure. Turn the gas control valveknob to ON to light the main burners.

If the burners do not light, the gas control valve has failed and must be replaced.

2.Measure the gas supply pres- sure.

Contact your local gas supplier to obtain adequate gas supply pressure.

3.Refer to the preceding Pilot Burner problems and use the correct remedy.

4.Increase the thermostat setting until the burners light. If this setting is greater than the de- sired temperature, reset the thermostat to the desired set- ting and allow the shortening to cool to the desired tempera- ture.

5.Replace the gas control valve.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents MX-14EG, MX-14EGU Anetsberger Brothers, IncContents Shipping Container Inspection Models Covered By This ManualFryer GAS Supply Specifications Fryer Electrical SpecificationsCode Requirements Installation Requirements Fryer Site Installation RequirementsLEG Leveling Instructions Installation InstructionsLEG Installation Instructions Caster Installation Instructions Caster Leveling INSTRUC- TionsFryer Restraining Device Installation Instructions Caster Leveling InstrucGAS Connection Instructions Which will void the fryer warranty Fryer Operating InsructionsFryer Operating Instructions Fryer Preparation for USELighting Procedure Gas Control Valve & Knob PositionsShutdown Procedure Food Product Daily Cleaning Procedure Monthly Maintenance Instructions Fryer Troubleshooting Guide Problem Cause RemedyFryer Troubleshooting Guide Problem Cause Main burners do not Thermostat has failed Recalibrated Limited Warranty Toll-free Customer & Warranty Service 800

14G, 14GS 14GU specifications

Anetsberger Brothers, a renowned name in the field of precision machining and manufacturing, has established its reputation with the introduction of the Anetsberger Brothers 14G, 14GS, and 14GU series. These machines are engineered to cater to diverse industrial needs, offering extensive capabilities in various applications such as metal working, fabrication, and assembly.

One of the main features of the Anetsberger Brothers 14G series is its robust construction, ensuring durability and longevity even in demanding environments. The machines are equipped with high-precision components that contribute to remarkable accuracy in machining operations. Users can expect tight tolerances and exceptional surface finishes, making them suitable for high-quality production standards.

The 14GS variant is enhanced with state-of-the-art technology that incorporates advanced control systems. With user-friendly interfaces, these systems allow operators to easily program and control machining processes, thereby increasing productivity. The integration of CNC (Computer Numerical Control) technology means that the 14GS can execute complex programming with precision, reducing the chances of human error and minimizing waste.

For industries that require versatility, the 14GU model stands out with its adaptability to various machining operations. This model is designed to handle an array of materials, including metals, plastics, and composites. The machine features interchangeable tooling options, making it ideal for businesses that engage in low to medium volume production runs. This flexibility ensures that companies can adjust their manufacturing processes based on changing demands without investing in additional machines.

All three models boast efficient energy consumption, contributing to reduced operational costs. Anetsberger Brothers has focused on sustainability, designing these machines not only for performance but also with eco-friendly practices in mind. Safety features have also been integrated to protect operators, ensuring a secure working environment.

In conclusion, the Anetsberger Brothers 14G, 14GS, and 14GU series offer exceptional performance characterized by durability, precision, and versatility. These machines are built for today’s fast-paced industrial demands, making them an asset for any manufacturing operation looking to enhance productivity and efficiency. By incorporating advanced technologies and user-centric design, Anetsberger Brothers continues to set benchmarks in the manufacturing industry.
Top Page Image Contents