Anetsberger Brothers 14GS 14GU warranty Main burners do not Thermostat has failed

Page 21

FRYER TROUBLESHOOTING GUIDE (Continued)

PROBLEM

CAUSE

REMEDY

 

 

 

Main burners do not

1. Thermostat has failed.

1. Turn the thermostat control

stop burning.

 

knob to OFF. If the burners

 

 

do not quit burning, the ther-

 

 

mostat has failed and must

 

 

be replaced.

 

2. Gas control valve has failed.

2. Turn the gas control valve knob

 

 

to OFF. If the burners do not

 

 

quit burning, the gas control

 

 

valve has failed and must be

 

 

replaced.

 

 

 

Liquid shortening does

1. Low gas supply pressure [less than 6”

1. Measure the gas supply pres-

not reach the desired

W.C. for natural gas; (11” W.C. for pro-

sure.

temperature for frying.

pane) when all other gas-powered equip-

Contact your local gas supplier

 

ment is operating], causing reduced heat

to obtain adequate gas supply

 

from main burners.

pressure.

 

2. Low gas manifold pressure [less than 3½ ”

2. Measure the gas pressure at

 

W.C. for natural gas; (10” W.C. for pro-

the fryer’s manifold pressure

 

pane).

tap. Adjust the manifold pres-

 

 

sure (see Figure 6), as neces-

 

 

sary: [a] Unscrew (and re-

 

 

tain) the threaded Main Burner

 

 

Regulator Adjustment Cover. [b]

 

 

Use a flat-blade screwdriver to

 

 

turn the regulator adjustment

 

 

screw (clockwise to increase;

 

 

counterclockwise to decrease)

 

 

to reset the pressure adjust-

 

 

ment. [c] Reinstall, and tighten,

 

 

the Regulator Adjustment

 

 

Cover, when finished.

 

3. Loose knob on thermostat; or thermostat

3. Stir the shortening to mix the

 

requires calibration (temperature setting

hot shortening with some from

 

differs by about 10°F from measured

the lower ‘cool zone’ and allow

 

shortening temperature).

it to sit for 5 minutes. Turn the

 

 

thermostat knob until it ‘clicks’

 

 

on (causing the main burners to

 

 

flame); note the setting where

 

 

this occurs. Turn the thermo-

 

 

stat knob until it ‘clicks’ off

 

 

(causing the main burners to go

 

 

out); note the setting where this

 

 

occurs. Repeat this tempera-

 

 

ture ‘click points’ step at least

 

 

three times to ensure that

 

 

 

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Anetsberger Brothers, Inc MX-14EG, MX-14EGUContents Models Covered By This Manual Shipping Container InspectionFryer Electrical Specifications Fryer GAS Supply SpecificationsCode Requirements Fryer Site Installation Requirements Installation RequirementsInstallation Instructions LEG Installation InstructionsLEG Leveling Instructions Caster Leveling INSTRUC- Tions Caster Installation InstructionsCaster Leveling Instruc Fryer Restraining Device Installation InstructionsGAS Connection Instructions Fryer Operating Insructions Which will void the fryer warrantyFryer Preparation for USE Fryer Operating InstructionsGas Control Valve & Knob Positions Lighting ProcedureShutdown Procedure Food Product Daily Cleaning Procedure Monthly Maintenance Instructions Problem Cause Remedy Fryer Troubleshooting GuideFryer Troubleshooting Guide Problem Cause Main burners do not Thermostat has failed Recalibrated Limited Warranty Toll-free Customer & Warranty Service 800

14G, 14GS 14GU specifications

Anetsberger Brothers, a renowned name in the field of precision machining and manufacturing, has established its reputation with the introduction of the Anetsberger Brothers 14G, 14GS, and 14GU series. These machines are engineered to cater to diverse industrial needs, offering extensive capabilities in various applications such as metal working, fabrication, and assembly.

One of the main features of the Anetsberger Brothers 14G series is its robust construction, ensuring durability and longevity even in demanding environments. The machines are equipped with high-precision components that contribute to remarkable accuracy in machining operations. Users can expect tight tolerances and exceptional surface finishes, making them suitable for high-quality production standards.

The 14GS variant is enhanced with state-of-the-art technology that incorporates advanced control systems. With user-friendly interfaces, these systems allow operators to easily program and control machining processes, thereby increasing productivity. The integration of CNC (Computer Numerical Control) technology means that the 14GS can execute complex programming with precision, reducing the chances of human error and minimizing waste.

For industries that require versatility, the 14GU model stands out with its adaptability to various machining operations. This model is designed to handle an array of materials, including metals, plastics, and composites. The machine features interchangeable tooling options, making it ideal for businesses that engage in low to medium volume production runs. This flexibility ensures that companies can adjust their manufacturing processes based on changing demands without investing in additional machines.

All three models boast efficient energy consumption, contributing to reduced operational costs. Anetsberger Brothers has focused on sustainability, designing these machines not only for performance but also with eco-friendly practices in mind. Safety features have also been integrated to protect operators, ensuring a secure working environment.

In conclusion, the Anetsberger Brothers 14G, 14GS, and 14GU series offer exceptional performance characterized by durability, precision, and versatility. These machines are built for today’s fast-paced industrial demands, making them an asset for any manufacturing operation looking to enhance productivity and efficiency. By incorporating advanced technologies and user-centric design, Anetsberger Brothers continues to set benchmarks in the manufacturing industry.
Top Page Image Contents