Haier HRF-663ITA2 Starting up the ice maker and dispenser, Using the digital display, Option a

Page 17

Starting up the ice maker and dispenser

Preparations before starting up the ice maker and dispenser

The ice maker can be connected either directly to a water supply line if fitted with a filter (option A) or to a drinking water container if fitted with a water pump (option B).

Cut the water line to the right length to prevent it from kinking. The recommended maximum length for the water line is 12 m. The pressure drop resulting from an excessively long water line could adversely affect the ice cube maker capacity.

Keep the water line away from heat sources.

The water supply line should be installed and checked by professionals.

When calling for refrigerated water for the first time, keep pressure on the dispenser lever for one minute several times until water flows out, in order to allow the water tank inside the appliance to fill up. Be sure not to hold the dispenser lever pressed for too long, otherwise the water valve may overheat.

Option A:

Water supply line installation

The pressure of the cold water supplied to the ice maker should be within 1.5-8.5 bar.

It is recommended to use drinking water for producing ice cubes since the filter does not sterilise bacteria.

Option B:

The water pump must be connected to its own outlet and properly grounded. Removal or modification of the water pump and modification or repair of the water supply line by unauthorised persons are not permissible.

To prevent fire, do not store or use flammable products such as fuel near the water pump.

The water pump is to be used solely with room temperature water; it is not suitable for use with chemicals, fruit juice or other grainy drinks, coffee or other hot liquids.

If the water pump will not be used for en extended period of time, pull out its power plug.

Periodically check the water tank to make sure that the water level is sufficient. Do not push, shake or knock the water pump.

Place the water pump and drinking water container on a sturdy and level surface. After opening the small lid of the drinking water container, protect the opening with a dust cover. Guide one end of a hose to the bottom of the container and connect the other end to the water pump inlet (indicated by an INLET symbol). Connect one end of another hose to the water pump outlet (indicated by an OUTLET symbol) and the other end to the water valve inlet under the back of the refrigerator.

26

Using the digital display

Superfrost

It has been scientifically proven that a Superfrost type device is necessary to freeze foods quickly and thoroughly. Press key B, upon which indicator G lights up and the Superfrost action is turned on. Press the key again to turn off the Superfrost action, upon which indicator G goes off. (In Intelligent mode, it is not necessary to turn on Superfrost.)

Temperature adjustments

At start-up, the Intelligent operating mode is selected. Press the Intelligent mode key to cancel the Intelligent operating mode.

Temperature adjustment (requires the Intelligent mode to be cancelled)

Refrigerator temperature adjustment: Press key D, upon which indicator I starts blinking. Each time key D is pressed, the temperature setting is increased by one of level from 1 to 5 (3 °C). If you keep pressing key D, the cycle starts over again from level 1 (7°C).

Freezer temperature adjustment: Press key C, upon which indicator H starts blinking. Each time key C is pressed, the temperature setting is increased by one level from 1 to 5 (-22 °C). If you keep pressing key C, the cycle starts over again from level 1 (-15°C).

Ice/water selection: Press key E.

Help yourself to ice cubes/crushed ice/refrigerated water. Your selection becomes available when the appropriate indicator lights up.

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Refrigerator Owner,s Manual Contents Your refrigerators features Refrigerator compartment ComponentsPrecautions Customer serviceDispenser not supplying Dispenser jammedIce maker does not work properly After-sales ServiceConfirm the following before ordering a repair Unusual noises Temperature is not cold enoughLight does not come on Separate and count the included accessories Preparations TroubleshootingSet up the appliance in a suitable area UnpackingAttaching the toe moulding PreparationsWhen on vacation Installing the door handleInoperation TransportationStandstill Event of a power outagePutting the appliance out of operation Cleaning Defrosting · CleaningDoor removal Removing the doorPrecautions Dispenser precautionsReinstall the door Slide the refrigerator through Door openingDispenser operation Setting up the Refrigerator/Freezer ComboDispenser operation Start-up Removing and installing the ice cube containerDigital display operation Refrigerator temperature displayIce maker and dispenser operation Ice maker operationStarting up the ice maker and dispenser Using the digital displayPreparations before starting up the ice maker and dispenser Option aCompartment Pack the food into portions of up to 2.5 kgThawing remain optimal for preparation Package the food before freezing it.Refrigerator compartment Freezer compartmentStocking example Home bar only for HRF-663ATA2Removing the veggie drawer cover Do not remove the inner cover Home barSocket E27 Do not use a replacement bulb of more Operation Using the veggie drawerHome bar only for HRF-663ATA2 Refrigerator compartment Cover is located on the inside of the veggie drawerTips on refrigeration

HRF-663ATA2, HRF-663ITA2 specifications

The Haier HRF-663ITA2 and HRF-663ATA2 are cutting-edge refrigeration solutions designed to meet the diverse needs of households looking for reliability and efficiency. These models stand out in the market due to their innovative features, advanced technologies, and user-centric design.

One of the primary features of both models is their impressive storage capacity. With ample space for frozen and fresh foods, families can store a wide variety of items without worrying about running out of room. The interior layout is thoughtfully designed for easy access, with adjustable shelves that allow users to customize their storage according to their preferences.

A standout technology in the Haier HRF-663ITA2 and HRF-663ATA2 is the No Frost system. This technology prevents the accumulation of ice inside the freezer compartment, thereby eliminating the need for manual defrosting. Users can enjoy hassle-free maintenance while ensuring that their food remains perfectly frozen and preserved.

Energy efficiency is another hallmark of these models. Both refrigerators are designed with energy-saving technologies that reduce power consumption, helping consumers to lower their utility bills. The inverter compressor operates quietly and adapts to temperature fluctuations, ensuring optimal cooling performance while promoting energy conservation.

The models feature a sleek and modern design that seamlessly blends into any kitchen decor. The exterior finish is stylish and easy to clean, while the interior features bright LED lighting, making it easier to see and access food items, even in low-light conditions.

Additional characteristics include a multi-air flow system that ensures even cooling throughout the refrigerator, preventing hot spots and preserving the freshness of food for longer periods. Furthermore, both models are equipped with a water dispenser, providing easy access to chilled water without the need for plumbing.

In terms of user convenience, the HRF-663ITA2 and HRF-663ATA2 also come with user-friendly controls, allowing owners to easily set the desired temperatures and manage various functions without any hassle.

Overall, the Haier HRF-663ITA2 and HRF-663ATA2 offer an excellent combination of style, efficiency, and advanced technology, making them ideal choices for modern households seeking reliable refrigeration solutions.
Top Page Image Contents