Extron electronic P/2 DA4xi s, P/2 DA6xi s Description, Features, Installation, Rack mounting

Page 5

Description

The P/2 DA4xi and P/2 DA6xi VGA-UXGA are high performance distribution amplifiers featuring one input, four outputs and one input, six outputs, respectively. Both P/2 DA units accept a VGA-UXGA video signal from a computer and distribute the signal to individually buffered outputs and one buffered loop-through. Each output is extendable up to 250' (76 m) with Extron’s VGA cables.

Examples of typical installations are shown in the diagrams on the following pages.

Features

•Bandwidth — 300 MHz (-3dB) RGB video bandwidth, fully loaded

•Video Gain switch — Selectable video gain of 0.7 V or

1 V (when the input signal is 0.7 V p-p) to compensate for long cable runs

•Power LEDs — Located on both front and back panels

•Versatile mounting options — A metal enclosure and a wide variety of mounting options

•ID bits pass through — Ensures the signal from the source matches the resolution and refresh rate of the local monitor.

Installation

The P/2 DA4xi and P/2 DA6xi can be mounted on a rack shelf, under a desk, or through a desk.

Rack mounting

UL guidelines for rack mounting

The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation of these products in a rack:

1.Elevated operating ambient temperature — If the unit is installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature. Therefore, install the equipment in an environment compatible with the maximum ambient temperature (Tma: +122 °F, +50 ° C) specified by Extron.

2.Reduced air flow — Install the equipment in the rack so that the equipment gets adequate air flow for safe operation.

P/2 DA 4xi/6xi • User’s Guide

1

Page 4 Page 6
Image 5
Page 4 Page 6
Contents VGA Distribution Amplifiers DA4xi DA6xiPrecautions FCC Class a Notice 安全须知 中文Page Installation FeaturesDescription Rack mountingDA4xi and P/2 DA6xi, cont’d Rack mounting procedureUnder-desk mounting Through-desk mounting Rear panel features Front panel indicatorsDA4xi and P/2 DA6xi, cont’d Operation Signal input and output connectionsVideo Gain Signal CompatibilityVideo DA4xi and P/2 DA6xi, cont’d SpecificationsVideo input Video outputSync General IEC power cord Rubber feet Optional accessoriesParts Included parts12 P/2 DA4xi/6xi User’s Guide DA4xi/6xi User’s Guide 14 P/2 DA4xi/6xi User’s Guide Central America Extron’s WarrantyExtron Electronics, USA

P/2 DA4xi s, P/2 DA6xi s specifications

Extron Electronics is known for its cutting-edge audio-video solutions, and the P/2 DA6xi S and P/2 DA4xi S distribution amplifiers are exemplary products in their lineup. These compact and reliable devices are designed to distribute high-quality analog video signals, supporting a variety of applications in educational, corporate, and institutional environments.

The P/2 DA6xi S is a six-output distribution amplifier, while the P/2 DA4xi S features four outputs. Both models are built to accommodate standard VGA and component video signals, ensuring compatibility with a wide range of sources. This makes them ideal for connecting computers, projectors, and other multimedia devices in a seamless manner.

One of the key features of these distribution amplifiers is their ability to maintain signal integrity over multiple outputs. Each output is independently buffered, allowing the devices to drive long cable runs without experiencing signal degradation or loss in quality. This is crucial in large installations where signals must travel considerable distances.

The P/2 DA6xi S and P/2 DA4xi S are also equipped with Extron’s unique Automatic Gain Control (AGC) technology. This innovative feature automatically adjusts the output level based on the input signal, ensuring consistent brightness and clarity across all outputs. Users can rest assured that their presentations will be visually consistent, regardless of the variations in source material.

Furthermore, these amplifiers come with a user-friendly design that simplifies installation. They feature Phoenix-style connectors for easy wiring and convenient mounting options for both rack and surface installations. For additional convenience, both models have front-panel LED indicators that provide real-time status feedback, making it easy to monitor operation at a glance.

In terms of power supply, the P/2 DA6xi S and P/2 DA4xi S units are designed for efficiency, utilizing an external power supply that minimizes heat generation while ensuring reliable performance. This focus on energy efficiency not only contributes to sustainability but also enhances the longevity of the devices.

In conclusion, the Extron P/2 DA6xi S and P/2 DA4xi S distribution amplifiers provide exceptional performance, flexibility, and ease of use, making them ideal choices for any professional audiovisual installation. With their robust features and advanced technologies, these devices ensure that users can enjoy high-quality visuals, making every presentation a memorable experience.
Top Page Image Contents