Instructions for the installer
8.INSTALLING THE APPLIANCE
8.1Positioning in the counter top
This is a cat. 3 appliance.
The following operation requires building and/or carpentry work, therefore it must be carried out by a skilled technician.
Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood as long as they are heat resistant (T 90°C).
8.1.1 Fixing to the supporting structure
Create an opening in the counter top with the dimensions shown in the figure, keeping a minimum distance of 50 mm from the rear edge. This appliance can be mounted against walls higher than the work surface on condition that a distance of "X" be kept between the appliance and the wall as shown in the figure so as to avoid damage from overheating. Make sure that there is a minimum of 750 mm between the hob and any shelf that may be installed directly above it.
WARNING: IN THE EVENT THAT YOU ARE INSTALLING A HOB FITTED WITH FISH BURNER, THE DISTANCE "X" FROM THE SIDE WALL, EXTENDS FROM 110 mm TO 300 mm.
Carefully position the insulating gasket provided on the external perimeter of the hole made in the hob top, in an attempt to make it stick
on the whole surface with gentle pressure from your hands. After carrying out these operations, use the 7 brackets provided to fit the hob to the structure. The figures below show how to use these brackets.
60
