Instructions for the user
Make sure you only use containers intended for induction cooking, with a thick and completely flat bottom, or, if not available, containers without a curved bottom (concave or convex).
YESNONO
6.7.5 Cookware detector signal
Every cooking zone has a “cookware detector” that only starts the cooking if there is a well positioned container with the suitable characteristics present on the burner.
If the container is not well positioned or is not made of the correct material and still tries to activate the burner, after a few seconds from the burner's
activation, the 
symbol will appear on the display.
6.7.6 Residual heat
Each cooking zone is equipped with a residual heat warning device. After
any zone is switched off, a flashing “
”may appear on the display. This warns that the cooking zone concerned is still very hot. Cooking can be
restarted while the "
" is flashing: in this case, proceed as described in point “3”.
6.7.7 Cooking hob lock-out
When not in use, the hob can be “locked” from being accidently turned on by children.
With the hotplates switched off, turn the control knobs to the left at the same time until the power display shows the letter “L”, then release the knobs. To unlock it repeat the same operation: The burners' displays will show a 0 that will indicate that the burners' lock has been deactivated.
6.7.8 Circuit board thermal protection
The appliance is provided with a device that constantly measures the temperature of the electronic circuit board.
If the temperature surpasses certain values, the device will activate certain functions to lower the temperature and allow the glass ceramic hob to continue to work correctly.
Below is a table with the operations that are activated automatically and the relative start temperature:
54
