Starting the Appliance
Starting a wash cycle
After having completed all of the installation steps in the preced- ing paragraphs, turn on the water all the way and press the ON- OFF button (A) located on the control pannel. The appliance is on (see fig.1).
Setting and Starting a wash Cycle
Select the desired cycle by pressing programme selection but- ton (F). Each time the button is pressed, the seletion cursor"Q"will come on in succession. Choose the wash cycle you feel is most appropriate for the type of dishes that need washing (consult the wash cycle table contained in this manual. After press the start- pause button(E), the wash cycle has begun and can no longer be changed. If necessary, read the paragraph entitled "Cancel- ling or modifying a cycle"
Cancelling or modifying a cycle
A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the detergent may have al- ready been used, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled (see the paragraph entitled, "Loading the Detergent"). To modify a cycle that is already underway, press the start- pause button (E) for 5 second, all of the settings will be cancelled. To set a new cycle, follow the instructions contained in the para- graph entitled "Setting and starting a wash cycle".
Wash Cycle Program Light
The dishwasher is equipped with a LCD indicator light (G) that turns on when the appliance is running the wash cycle.
At the end of the wash cycle
Six beeps will indicate that the wash cycle has finished and the LCD display (B) will come on (see fig.1). Turn off the appliance using the
Setting the Wash Cycle with a Delayed Start Time
By pressing the "D" button (see
Each time the "L" button is pressed, the display (M) will show the number of hours for the delay period. Choose the amount of time desired. After selecting the wash cycle, pressing the
After the time has alapsed, the cycle will start.
NOTE:
During the delay period, it is preferable not to change any of the settings, If this is necessary, all of the settings must be cancelled by pressing the ON/OFF button (A).
At this point, all of the steps for "setting the wash cycle with a Delayed Start Time" and "Setting and Starting a wash cycle" must be repeated, following the instructions contained in the corre- sponding sections.
If the door is opened to the unit during the delay period, the count- down will stop. It wil begin again when the door is closed.
All of the wash cycle set to reverse time function, we may in focus start circulate time.
Wash Cycle adjustment Buttons
Button for "extre drying" or "half load" or "delay"
By pressing the "D" button in sequence ,the selection cursor (Q) will come on in turn :
Extre drying
By pressing the "D" button,the drying time of extre drying will be longer ,and the drying relating is better.
Half load
By pressing the "D" button,this button (see
`óÅäÉ=éÜ~ëÉ=ìåÇÉêï~ó=áåÇáÅ~íçå
The dishwasher is equipped an indecation "P" comprissing 4 symbels which represerd the diferent phases of a wash cycle. When the wash cycle has started,the displace will indicate ,the phase under way in sequence.There place are
.6.
GB