Haier HDE-2580EGB manual Operation Of Control Panel, Before cooking, Time.Weight/Auto Cooking knob

Page 8
OPERATION OF CONTROL PANEL

OPERATION OF CONTROL PANEL

1.Before cooking

The LED flashes

 

 

3 times when plugged in power supply. Then it flashes:

 

 

 

, prompting you

to input the cooking menu and time.

2. Time.Weight/Auto Cooking knob

You can select auto cooking menu, increase or decrease cooking time and weight during operation by turning Time.Weight/Auto Cooking knob.

3. Pause/Cancel

7

Image 8
Contents save it for future reference Please read this booklet carefully before fixing and using andHDE-2580EGB INSTALLATION OF MICROWAVE OVEN 2 The appliance must be positioned so that the plug is accessiblec Reference plate thickness between 18 and 20mm ② INSTALLATION OPERATION THEORY OF MICROWAVE OVENCavity L560mm*H360mm*D550mm Intake L≥272mm*W≥72mm Exhaust Port L≥272mm*W≥72mmFig.4 eFinal assembly as shown in Fig.5 Fig.5 fCabinet airflow chart as shown in Fig.6dSecure ornamental frame to holders,as shown in Fig.4 The side with gap should be installed at the bottom of MWOUTENSILS GUIDELINE FOR THE FIRST USEIMPORTANT SAFEGUARDS Household use only PRODUCT INTRODUCTION 2. Time.Weight/Auto Cooking knob 3. Pause/CancelOPERATION OF CONTROL PANEL 1. Before cooking4. Clock setting24 hours 5. Auto reminder6. Child lock function 7. Microwave cooking10. Grill Combi 8. Express9.Grill 11. Auto Defrost Defrost guideSteaks chop Minced BeefWeight.Time/Auto Cooking knob 4. Turn Weight.Time/Auto Cooking knob12. Auto Cooking Auto cook table2.2 Turn Time.Weight/Auto Cooking knob to set cooking time 13. Automatic starting delay function14. Multi-sequence cooking 5. You may check the preset starting timeMICROWAVE COOKING TIP CLEANING AND MAINTENANCEThe oven should be cleaned regularly and any food deposits removed SERVICING DoorControl panel Interior walls1. Unproper fitting of magnetron