Haier DW15-PFE1, DW15-PFE2 manual How to fill rinse aid, Rinse aid, Loading the rinse aid

How to fill rinse aid

Rinse aid

This product makes dishes sparkle and helps them to dry without spotting. The dispenser is located on the inside panel of the door .

For DW15-PFE1**

When the low rinse aid indicator “2 ” is bright ,it means the rinse aid is low,you must load rinse aid .

2

Low

Full

For DW15-PFE2**

When the low rinse aid indicator “H ” lights , you must load

rinse aid .

H

Loading the rinse aid

Regardless of the type of detergent dispenser installed on
your appliance, you must proceed as indicated below when
loading the rinse aid.
To open the dispenser, turn the "3" cap in an anti-clockwise	3
direction and then pour in the rinse aid, making sure not to
	4
overfill. The amount of rinse aid used for each cycle can be
regulated by turning the " 4" dose adjustor, located beneath
the "3" cap, with a screwdriver. There are 6 different settings;
the normal dosage setting is 3.

Important

Proper dosage of the rinse aid improves drying.

If drops of water remain on the dishes or spotting occurs, the dosage adjus- tor should be turned to a higher setting.

If the dishes have white streaks, turn the dosage adjustor to a lower setting.

11