Haier DW15-PFE1 manual Fault finding, Resolving minor problems yourself, With the appliance itself

Page 27

Fault finding

Resolving minor problems yourself

Experience has shown that you can resolve most problems that rise during normal daily usage yourself, without having to call out a service engineer.Not only does this save costs,but it also means that the appliance is available for use again that much sooner. The following list of common occurrences and their remedies should help you identify the causes of most problems.

Problems...

...when the appliance is switched on

Appliance does not start up

Fault with fuse in mains electricity supply.

Plug not inserted in wall socket.

Appliance door not closed properly.

Programme button has not been pressed.

Water tap not turned on.

Blocked strainer in water intake hose.

- The strainer is situated in the Aquastop or supply-hose connection.

Caution

Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable equipment dam- age as well as danger to the user.

...with the appliance itself	K
...with the appliance itself
Error display on the time-remaining indicator
When all the programme indicators “ K” blink.	K
Have you checked whether:
the door is closed properly.
When the programme indicators “ K1,K2,K3” blink.	K1 K2 K3
Have you checked whether:
the water is turned on and the hose is connected properly;
the water supply to the house is on and has sufficient pressure;	K1 K2 K3
	K1 K2 K3
the water supply hose is crimped or bent;
the filter for the water supply hose is clogged.
the drain hose is too low.

25

Image 27

Contents Dishwasher DW15-PFE1**/PFE2 Instructions for Use Page Index During normal use Safety informationDuring installation At time of deliveryIf a fault occurs When disposing of old appliancesIf your family includes children Cold water connection InstallationPositioning the appliance Levelling the applianceElectrical Connection Drain hose connectionPlease follow below pictures step by step How to remove the top of your dishwasherDW15-PFE1 DW15-PFE2 Getting to know your dishwasherClose-up view control panel Models explanationDishwasher interior For DW15-PFE1 How to fill the saltSalt Loading the salt into the containerWater Hardness Adjusting salt consumptionHow to fill rinse aid Rinse aidLoading the rinse aid Damage to glassware and other dishes Not suitable for the dishwasherWhat you should not put into the dishwasher Our recommendationHow to use the lower rack How to use the upper rackPull out the rack to load the dishwasher Knife rack ShelfHow to fill the detergent dispenser DetergentLoading the detergent Soak Programme overviewEN50242 test with rinse aid setting Programme data Washing dishesProgramme selection Earn savingsTurn on the tap Switching the dishwasher onSwitching the dishwasher OFF End of programmeInterrupping the programme Delayed start programming for DW15-PFE2Goes out Cancelling or modifying a cycleLoad Button for DW15-PFE2 To select 1/2 loadHow to keep your dishwasher in shape Rinse-aid for DW15-PFE2 Care and maintenanceOverall condition of appliance Dishwasher salt for DW15-PFE2Spray arms Clean both spray arms under running waterWith the appliance itself Fault findingResolving minor problems yourself Problems When the appliance is switched onLower spray arm rotates with difficulty Lid in detergent compartment cannot be closedRemnants of detergent stuck inside dispenser With the dishes,cutlery, etc During washingTraces of rust on cutlery Plastic items are discolouredDishes,cultlery,etc.have not been dried Glasses have a dull appearanceWidth 60 cm Depth Height 85 cm Capacity Technical dataImportant information General informationFor Switzerland only Page Overflow switch Heater Flowmeter Water level switch Overflow switch HeaterWiring box Way valve Door switch Softener valve