When the programme indicators “ K1,K3,K5” (DW15- PFE1**) or “ K1,K3,K4”
Have you checked whether:
the drain hose is crimped or bent.
the drain hose is too high.
When the programme indicators “ K1,K2,K5” (DW15- PFE1**) or “ K1,K2,K6”
Have you checked whether:
the drain hose is too low.
K1 K3 K5
K1 K3 K4
| K1 K2 | K5 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| K1 K2 | K6 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
26
If you take all these checks and the dishwasher still does not function or your dish- washer have any other error display, you can power the dishwasher OFF, and wait a few minutes. You can power the dishwasher on, try it again , if the dishwasher still does not function and/or the problem persists, contact the nearest authorised service center and provide them with the following information:
the nature of the problem.
the model type number (Mod...) And the serial number (S/N...), which are indicated on the plate located on the side of the inner part of the door.
Lower spray arm rotates with difficulty
Spray arm is blocked by small items or food remains.
Lid in detergent compartment cannot be closed
Detergent compartment has been overfilled.
Mechanism is clogged with remnants of detergent.
Indicator lamps do not extinguish after washing has finished
Main switch is still set to ON.
Remnants of detergent stuck inside dispenser
Compartment was damp when it was filled up with detergent. Compartment must be dry before detergent is added.