Hoshizaki KM-900MWF, KM-900MRF3, KM-900MAF service manual Maintenance

8)Drain the Water Tank. See the above step 5) in “[a] CLEANING PROCEDURE.”

9)Replace the removed parts and the Insulation Panel in their correct positions.

10)Repeat the above steps 15) through 28) in “[a] CLEANING PROCEDURE” two times to rinse thoroughly.

11)Close the Cleaning Valve.

12)Move the Control Switch to the “ICE” position.

13)Replace the Front Panel in its correct position.

14)Clean the Storage Bin with water.

15)Turn on the power supply, and start the automatic icemaking process.

3. MAINTENANCE

IMPORTANT

This icemaker must be maintained individually, referring to the instruction manual and labels provided with the icemaker.

1) Stainless Steel Exterior

To prevent corrosion, wipe the exterior occasionally with a clean and soft cloth. Use a damp cloth containing a neutral cleaner to wipe off oil or dirt build up.

2)Storage Bin and Scoop

•Wash your hands before removing ice. Use the plastic scoop provided.

•The Storage Bin is for ice use only. Do not store anything else in the bin.

•Keep the scoop clean. Clean it by using a neutral cleaner and rinse thoroughly.

•Clean the bin liner by using a neutral cleaner. Rinse thoroughly after cleaning.

3)Condenser (Except water-cooled model)

Check the Condenser once a year, and clean if required by using a brush or vacuum cleaner. More frequent cleaning may be required depending on the location of the icemaker.

65