[b] STORAGE BIN - Following Cleaning Procedures for Water System
1)Remove the Front Cover of the Storage Bin.
2)Remove the thumbscrews, first from the vertical plane and then from the horizontal plane of the Motor Brackets. Move the Agitating Motor(s) and the Dispensing Motor toward you. Then remove the Agitator(s) and the Dispensing Auger. See Fig. 13.
Note: Models
Fig. 13
3)Remove the Bin Control Bracket Assembly. See Fig. 14
4)Remove the Snap Pin, the Shaft and the Activator.
5)Remove the thumbscrews, the
Fig. 14 | Fig. 15 |
30