Tripp Lite 700DV Procedure, Remove Front Panel 2 Disconnect Batteries, Replace Front Panel

200511135 93-2513 SMART700DV OM.qxd 1/12/2006 3:28 PM Page 9

Battery Replacement

Under normal conditions, the original batteries in your UPS will last many years. See Safety section before replacing batteries. The batteries are designed for hot-swap replacement (i.e. leaving the UPS in ON mode), but some qualified service personnel may wish to put the UPS in the OFF mode and disconnect equipment before proceeding.

Procedure

1	￿
	6

1Remove Front Panel

2Disconnect Batteries

3Remove/Dispose of Batteries

4Add Batteries

5Connect Batteries

Attach connectors: black-to-black and red-to-red.

6 Replace Front Panel

￿2 5￿

￿3 4

9