Hoshizaki F-450MAH(-C) instruction manual Sanitizing Solution, Sanitizing Procedure Initial

Page 17

16)After the gear motor starts, turn off the power supply. Remove the front panel, then move the control switch to the "DRAIN" position. Replace the front panel in its correct position.

17)Turn on the power supply and allow the water system to drain for 5 minutes.

Note: If you do not sanitize the unit, go to step 14 in "III.A.5. Sanitizing Procedure ‑ Final."

18) Turn off the power supply, then close the icemaker water supply line shut-off valve.

3. Sanitizing Solution

IMPORTANT

For safety and maximum effectiveness, use the solution immediately after dilution.

Dilute 2.5 fl. oz. (74 ml or 5 tbs) of a 5.25% sodium hypochlorite solution (chlorine bleach) with 5 gal. (19 l) of warm water.

4.Sanitizing Procedure - Initial

1)Make sure the power supply is off and the icemaker water supply line shut-off valve is closed. Remove the front and top panels, then move the power switch to the "OFF" position.

2)Remove the strap connecting the spout to the chute assembly, then remove the spout. Remove the packing at the top of the cylinder and also remove the packing between the spout and the chute.

3)Pour the sanitizing solution over the extruding head until the evaporator assembly and the reservoir are full and the solution starts to overflow into the drain pan.

4)Remove the proximity switch from the chute assembly, then remove the chute assembly from the icemaker.

5)Remove the packing at the bottom of the chute. Remove the 3 ties and the chute insulation.

6)Remove the 2 baffles.

7)Remove the plate from the top of the chute, then remove the bin control assembly by sliding it slightly towards the chute opening and lifting it off.

8)Disassemble the bin control assembly by removing the 2 snap pins, shaft, and actuator.

9)Soak the spout, packings, chute, baffles, plate, and bin control assembly in the sanitizing solution for 10 minutes then wipe them down.

10)Rinse the parts thoroughly with clean water.

CAUTION

If the solution is left on these parts, they will rust.

11) Replace all parts in their correct positions.

IMPORTANT

When installing the baffles, make sure that the bent surface (the one without the studs) faces the actuator so that the bent surface can guide the ice to the center of the actuator.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Modular Flaker Models 450MAH-C Hoshizaki AMERICA, INC Contents Serious injury Important Safety InformationIndicates important information about the use and care Unit450MAH-C air-cooled Specifications Nameplate RatingDimensions/Connections Checks Before Installation II. Installation and Operating InstructionsHow to Remove Panels See FigLocation Setup115-120/60/1 Electrical ConnectionWater Supply and Drain Connections 450MAH Final Checklist Startup Page Cleaning Solution III. Cleaning and MaintenanceCleaning and Sanitizing Instructions Cleaning Procedure Sanitizing Procedure Initial Sanitizing SolutionSanitizing Procedure Final Frequency Area Task MaintenanceDrain the evaporator Preparing the Icemaker for Long StorageRemove the water from the icemaker water supply line Page Hoshizaki AMERICA, INC

F-450MAH(-C) specifications

The Hoshizaki F-450MAH(-C) is a standout model in the realm of commercial refrigeration, primarily designed for foodservice operators seeking reliability and efficiency. This undercounter refrigerator not only offers ample storage space but also incorporates advanced technologies that cater to the demands of a busy kitchen environment.

One of the main features of the F-450MAH(-C) is its robust construction. It includes a stainless steel exterior and interior which not only enhances its durability but also facilitates easy cleaning. This choice of material is essential in foodservice settings where hygiene and maintenance are paramount. The unit is designed to withstand the rigors of daily use, ensuring that it remains a vital asset in any kitchen.

The F-450MAH(-C) boasts a spacious capacity of approximately 19 cubic feet, providing ample room for storage. Its design includes adjustable shelves, allowing users to customize the interior layout according to their specific needs. This flexibility is particularly beneficial for accommodating various food items, from bulk ingredients to prepared dishes.

Equipped with an efficient refrigeration system, the Hoshizaki F-450MAH(-C) operates at optimal temperatures ranging from 33°F to 39°F. This temperature range is critical for food preservation, ensuring that perishable items remain fresh. The unit also features a front-breathing design, allowing it to be installed flush against walls or other equipment, maximizing the use of available kitchen space.

Energy efficiency is another hallmark of the F-450MAH(-C). It complies with energy-saving standards, which not only helps businesses reduce operational costs but also contributes to a more sustainable environment. Its efficient compressor contributes to lower energy consumption while maintaining effective cooling performance.

Customer convenience is further enhanced by the unit’s digital display panel, which allows for easy temperature monitoring and adjustments. This feature promotes proactive management of the refrigeration environment, ensuring that food items are stored safely.

In summary, the Hoshizaki F-450MAH(-C) is an exceptional choice for commercial kitchens seeking reliable refrigeration solutions. Its combination of durability, capacity, energy efficiency, and technological advancements makes it a worthy investment for any foodservice operation. Whether used in restaurants, cafes, or catering services, this refrigerator promises to meet the rigorous demands of modern food preservation, contributing to the overall efficiency of kitchen operations.
Top Page Image Contents