Hoshizaki F-450MAH(-C) instruction manual Startup

Page 13

H. Startup

WARNING

1.All parts are factory-adjusted. Improper adjustments may adversely affect safety, performance, component life, and warranty coverage.

2.If the icemaker is turned off, wait for at least 3 minutes before restarting the icemaker to prevent damage to the compressor.

3.At startup, confirm that all internal and external connections are free of leaks.

1)Open the water supply line shut-off valve.

2)Remove the front panel. Move the control switch on the control box to the "ICE" position, then move the power switch to the "ON" position. Replace the front panel in its correct position, then turn on the power supply to start the automatic icemaking process.

3)Once the icemaker starts to produce ice, allow it to run for another 30 minutes.

4)Turn off the power supply, then remove the front panel.

5)Move the control switch to the "DRAIN" position, then replace the front panel in its correct position. Turn on the power supply and allow the water system to drain for 5 minutes.

6)Confirm bin control operation:

a)Turn off the power supply, then remove the front and top panels.

b)Move the power switch to the "OFF" position.

c)Remove the strap connecting the spout to the chute assembly. See Fig. 5. Pull up the chute assembly slightly so that you can access the actuator located in the top of the chute.

d)Move the control switch to the "ICE" position, then move the power switch to the "ON" position.

e)Turn on the power supply to start the automatic icemaking process.

WARNING! Keep hands, hair, and loose clothing clear of the cutter and auger on top of the evaporator assembly. Allow the icemaker to run until the compressor starts (approximately 60 seconds).

f)Press and hold the actuator paddle located in the top of the chute. The icemaker should shut down within 6 seconds.

Bin Control Assembly

Proximity

Switch

Strap

Actuator

 

Spout

Strap

Chute

Fig. 5

Assembly

 

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Modular Flaker Models 450MAH-C Hoshizaki AMERICA, INC Contents Serious injury Important Safety InformationIndicates important information about the use and care Unit450MAH-C air-cooled Specifications Nameplate RatingDimensions/Connections Checks Before Installation II. Installation and Operating InstructionsHow to Remove Panels See FigLocation Setup115-120/60/1 Electrical ConnectionWater Supply and Drain Connections 450MAH Final Checklist Startup Page Cleaning and Sanitizing Instructions III. Cleaning and MaintenanceCleaning Solution Cleaning Procedure Sanitizing Procedure Initial Sanitizing SolutionSanitizing Procedure Final Frequency Area Task MaintenanceRemove the water from the icemaker water supply line Preparing the Icemaker for Long StorageDrain the evaporator Page Hoshizaki AMERICA, INC

F-450MAH(-C) specifications

The Hoshizaki F-450MAH(-C) is a standout model in the realm of commercial refrigeration, primarily designed for foodservice operators seeking reliability and efficiency. This undercounter refrigerator not only offers ample storage space but also incorporates advanced technologies that cater to the demands of a busy kitchen environment.

One of the main features of the F-450MAH(-C) is its robust construction. It includes a stainless steel exterior and interior which not only enhances its durability but also facilitates easy cleaning. This choice of material is essential in foodservice settings where hygiene and maintenance are paramount. The unit is designed to withstand the rigors of daily use, ensuring that it remains a vital asset in any kitchen.

The F-450MAH(-C) boasts a spacious capacity of approximately 19 cubic feet, providing ample room for storage. Its design includes adjustable shelves, allowing users to customize the interior layout according to their specific needs. This flexibility is particularly beneficial for accommodating various food items, from bulk ingredients to prepared dishes.

Equipped with an efficient refrigeration system, the Hoshizaki F-450MAH(-C) operates at optimal temperatures ranging from 33°F to 39°F. This temperature range is critical for food preservation, ensuring that perishable items remain fresh. The unit also features a front-breathing design, allowing it to be installed flush against walls or other equipment, maximizing the use of available kitchen space.

Energy efficiency is another hallmark of the F-450MAH(-C). It complies with energy-saving standards, which not only helps businesses reduce operational costs but also contributes to a more sustainable environment. Its efficient compressor contributes to lower energy consumption while maintaining effective cooling performance.

Customer convenience is further enhanced by the unit’s digital display panel, which allows for easy temperature monitoring and adjustments. This feature promotes proactive management of the refrigeration environment, ensuring that food items are stored safely.

In summary, the Hoshizaki F-450MAH(-C) is an exceptional choice for commercial kitchens seeking reliable refrigeration solutions. Its combination of durability, capacity, energy efficiency, and technological advancements makes it a worthy investment for any foodservice operation. Whether used in restaurants, cafes, or catering services, this refrigerator promises to meet the rigorous demands of modern food preservation, contributing to the overall efficiency of kitchen operations.
Top Page Image Contents