Installation and Operation, cont’d

6" Deep Rack Shelf	1/2 Rack Width Front False
	Faceplate

Front false faceplate uses 2 screws.

(2) 4-40 x 3/16" Screws

Use 2 mounting holes on opposite corners.

Mounting an MDA EQ on a 6-inch rack shelf

Furniture mounting

3.	Hold the unit with the attached brackets against the
	underside of the table or other furniture. On the mounting
	surface, mark the location of the bracket’s screw holes.
4.	Drill 3/32" (2 mm) diameter pilot holes, ¼" (6.3 mm) deep
	in the mounting surface at the marked screw locations.
5.	Insert #8 wood screws into the four pilot holes. Tighten
	each screw into the mounting surface until slightly less
	than ¼" of the screw head protrudes.
6.	Align the mounting screws with the slots in the brackets
	and place the unit against the surface, with the screws
	through the bracket slots.
7.	Slide the unit slightly forward or back, then tighten all
	four screws to secure it in place.

Projector mounting

To projector-mount the MDA EQ, use one of the optional mounting kits described in the following sections.

PMK 100 Mini Projector Mounting Kit

The PMK 100 is a projector mounting kit (part #70-217-01) designed for use with Extron 1U high, quarter-rack width products like the VersaTools products. It allows them to be mounted near or on a projector support.

To furniture-mount the MDA EQ, use the optional MBU 123 mini under-desk mounting kit (part #70-212-01), as follows.

Projector

Mounting

Bracket

Projector

Mounting Bolt

Preparing the MDA EQ for under-desk mounting

1.	If rubber feet were previously attached to the bottom of the
	unit, remove them.

2Attach the mounting brackets to the MDA EQ with the provided machine screws as shown in the previous figure.

Projector-mounting the MDA EQ using the PMK 100 Projector Mounting Kit

Follow these steps to projector-mount the MDA EQ using the PMK 100 kit:

1. If rubber feet are attached to the bottom of the MDA EQ, remove them.

2-4

VersaTools® MDA EQ Series • Installation and Operation

2-5

MDA 2V EQ, MDA 4SV EQ, MDA 4V EQ specifications

Extron Electronics is renowned for its innovative solutions in the field of professional audiovisual technology. Among its diverse lineup of products, the MDA 2V EQ, MDA 4SV EQ, and MDA 4V EQ stand out as exceptional multi-distribution amplifiers designed to enhance signal processing and distribution in various AV settings.

The MDA 2V EQ is a two-channel distribution amplifier that excels in providing high-quality video and audio signal distribution. It is equipped with advanced equalization capabilities that allow users to fine-tune signal levels for optimal performance over long cable runs. The MDA 2V EQ supports a wide range of video formats, including composite, S-video, and component, ensuring compatibility with various equipment. Its compact design makes it easy to integrate into existing AV setups, while its robust construction ensures reliability in demanding environments.

The MDA 4SV EQ, on the other hand, is a four-channel distribution amplifier specifically designed for S-video signals. This model also features EQ for tailoring the output levels to match varying distances between the source and the display devices. By providing four isolated outputs, it ensures that each connected device receives a clean and undistorted signal. The MDA 4SV EQ is ideal for applications that demand high-quality S-video distribution, such as corporate presentations or educational content delivery.

Meanwhile, the MDA 4V EQ extends Extron’s commitment to versatile AV solutions with its four-channel capability focused on composite video signals. Similar to its counterparts, this model includes built-in EQ, enabling precise signal adjustments. Its ability to drive multiple outputs without compromising signal integrity makes it a perfect choice for situations requiring extensive video distribution.

All three models incorporate Extron’s proprietary technologies, ensuring minimal signal degradation and enhanced performance. They feature user-friendly troubleshooting tools such as LED indicators for signal presence and power status. Additionally, these amplifiers are designed with thermal protection to avoid overheating during extended use.

In summary, the Extron MDA 2V EQ, MDA 4SV EQ, and MDA 4V EQ offer a range of features tailored for optimal video and audio distribution in professional settings. Their advanced signal management technologies, robust performance, and user-friendly design make them invaluable tools for AV professionals looking to achieve high-quality signal distribution in diverse applications.