Extron electronic MDA 2V EQ, MDA 4V EQ, MDA 4SV EQ user manual Table of Contents

Page 5

Quick Start Guide — MDA EQ Series, cont’d

SmoothRidges

A

A

SECTION A–A

 

 

 

Power Supply

Tie Wrap

 

Output Cord

 

 

0.3” (7 mm) MAX

Orange Captive Screw

Connector

Wiring the power cord

Step 4

Connect power cords to the input and the outputs, and turn on the equipment.

Step 5

Adjust the potentiometers for the outputs, using an Extron Tweeker.

If using very short output cables, set all potentiometers to the default setting (the arrow on the potentiometer pointing to the dot beside it; see the illustration below).

1

2

3

4

GAIN EQ GAIN EQ GAIN EQ GAIN EQ

Potentiometers at default settings

If using long cables, follow these steps:

a.

Supply the Color Bars test signal to the input. (It is

 

recommended that you use an Extron VTG 300 Video Test

 

Generator to generate the test signal.)

b.

Adjust the Gain pot for output 1 until the signal level at

 

the far end is the same as the input (or the display shows

 

the correct brightness and contrast).

c.

Adjust the EQ pot for output 1 so that no overshoot or

 

round front corner appears at the far end on the scope (or

 

you see a sharp picture with no smearing).

d.

Repeat steps b and c for the rest of the outputs.

Table of Contents

Chapter 1 • Introduction

1-1

About this Manual

1-2

About the MDA EQ Series Mini Distribution

 

Amplifiers

1-2

Models

1-2

Features

1-2

Connection diagrams

1-3

Chapter 2 • Installation and Operation

2-1

Mounting the MDA EQ Series

2-2

Tabletop use

2-2

Rack mounting

2-2

Furniture mounting

2-4

Projector mounting

2-5

PMK 100 Mini Projector Mounting Kit

2-5

PMK 300 Projector Mounting Kit

2-6

PMK 350 Projector Mounting Kit

2-8

Rear Panel Features and Cabling

2-10

Front Panel Features and Operation

2-13

Appendix A • Specifications, Parts, and

 

Accessories

A-1

Specifications

A-2

Models

A-4

Included Parts

A-4

Optional Accessories

A-5

All trademarks mentioned in this manual are the properties of their respective owners.

68-978-01 Rev B

07 06

QS-2 VersaTools® MDA EQ Series • Quick Start Guide

VersaTools® MDA EQ Series • Table of Contents

i

Page 4 Page 6
Image 5
Page 4 Page 6
Contents VersaTools Video Mini Distribution Amplifiers User’s ManualFCC Class a Notice PrecautionsExtron’s Warranty 噝 Projector Mounting Bracket Mounting Bolt Quick Start Guide MDA EQ SeriesTable of Contents MDA EQ Series Table of Contents, cont’dAbout the MDA EQ Series Mini Distribution Amplifiers IntroductionAbout this Manual Introduction, cont’d TwoMounting the MDA EQ Series Installation and OperationTabletop use Rack mountingFurniture mounting Installation and Operation, cont’dProjector mounting Mounting an MDA EQ on a 6-inch rack shelfPMK 300 Projector Mounting Kit For a smaller or larger pole Locally obtain a Mounting the MDA EQ using the PMK Projector Mounting KitMDA 2V EQ rear panel Rear Panel Features and CablingMDA 4V EQ rear panel MDA 4SV EQ rear panelPower connector wiring Front Panel Features and OperationMDA 2V EQ front panel MDA 4V EQ front panelAAppendix a Specifications, Parts, and Accessories Included Parts Specifications, Parts, and Accessories, cont’d ModelsOptional Accessories Specifications, Parts, and Accessories, cont’d Specifications, Parts, and Accessories, cont’d
Related manuals
Manual 14 pages 40.02 Kb

MDA 2V EQ, MDA 4SV EQ, MDA 4V EQ specifications

Extron Electronics is renowned for its innovative solutions in the field of professional audiovisual technology. Among its diverse lineup of products, the MDA 2V EQ, MDA 4SV EQ, and MDA 4V EQ stand out as exceptional multi-distribution amplifiers designed to enhance signal processing and distribution in various AV settings.

The MDA 2V EQ is a two-channel distribution amplifier that excels in providing high-quality video and audio signal distribution. It is equipped with advanced equalization capabilities that allow users to fine-tune signal levels for optimal performance over long cable runs. The MDA 2V EQ supports a wide range of video formats, including composite, S-video, and component, ensuring compatibility with various equipment. Its compact design makes it easy to integrate into existing AV setups, while its robust construction ensures reliability in demanding environments.

The MDA 4SV EQ, on the other hand, is a four-channel distribution amplifier specifically designed for S-video signals. This model also features EQ for tailoring the output levels to match varying distances between the source and the display devices. By providing four isolated outputs, it ensures that each connected device receives a clean and undistorted signal. The MDA 4SV EQ is ideal for applications that demand high-quality S-video distribution, such as corporate presentations or educational content delivery.

Meanwhile, the MDA 4V EQ extends Extron’s commitment to versatile AV solutions with its four-channel capability focused on composite video signals. Similar to its counterparts, this model includes built-in EQ, enabling precise signal adjustments. Its ability to drive multiple outputs without compromising signal integrity makes it a perfect choice for situations requiring extensive video distribution.

All three models incorporate Extron’s proprietary technologies, ensuring minimal signal degradation and enhanced performance. They feature user-friendly troubleshooting tools such as LED indicators for signal presence and power status. Additionally, these amplifiers are designed with thermal protection to avoid overheating during extended use.

In summary, the Extron MDA 2V EQ, MDA 4SV EQ, and MDA 4V EQ offer a range of features tailored for optimal video and audio distribution in professional settings. Their advanced signal management technologies, robust performance, and user-friendly design make them invaluable tools for AV professionals looking to achieve high-quality signal distribution in diverse applications.
Top Page Image Contents