Hoshizaki KM-1800SWH/3, KM-1800SRH/3, KM-1800SAH/3 instruction manual How to Remove Panels, See Fig

Page 13

II.Installation and Operating Instructions A. Checks Before Installation

IMPORTANT

1.Remove all shipping cartons, tape and packing. If packing material is left in the icemaker, it will not work properly.

2.Ensure all components, fasteners and thumbscrews are securely in place.

•Remove the panels to prevent damage when installing the icemaker. (See "B. How to Remove Panels.")

•Remove the package containing the accessories from the compressor compartment.

•Remove the protective plastic film from the panels. If the icemaker is exposed to the sun or to heat, remove the film after the icemaker cools.

•Check that the refrigerant lines do not rub or touch lines or other surfaces.

•Check that the compressor is snug on all mounting pads.

•See the nameplate on the rear panel, and check that your voltage supplied corresponds with the voltage specified on the nameplate.

•This icemaker needs a storage bin. The recommended storage bin is HOSHIZAKI ICE STORAGE BIN, Model B-800 series.

B. How to Remove Panels

See Fig. 1

•Front Panel: Remove the two screws. Lift up and pull towards you.

•Top Panel: Remove the two screws, and then lift off.

•Side Panel (R): Remove the screw. Pull slightly towards you, and take off.

•Insulation Panel: Remove the thumbscrew. Lift up slightly, and pull towards you.

Fig. 1

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Superior Degree Reliability Issued Revised Hoshizaki AMERICA, INC Contents KM-1800SAH air-cooled Specifications Nameplate RatingKM-1800SAH3 air-cooled, 3 phase KM-1800SWH water-cooled KM-1800SWH3 water-cooled, 3 phase KM-1800SRH remote air-cooled KM-1800SRH3 remote air-cooled, 3 phase KM-1800SAH/3 Dimensions/ConnectionsKM-1800SWH/3 KM-1800SRH/3 See Fig How to Remove PanelsLocation SetupPage Installation of Second Unit Page KM-1800SHKM-1800SH3 Electrical ConnectionChecks Before Installation Installation of Remote Condenser UnitLocation Setup Stacking Condenser Unit Electrical ConnectionSee a, 14b and 14c Water Supply and Drain ConnectionsKM-1800SAH/3 KM-1800SWH/3 KM-1800SRH/3 Final Checklist Startup Cleaning Instructions III. Cleaning and Maintenance InstructionsCleaning Procedure Sanitizing Procedure Following Cleaning Procedure Maintenance InstructionsStainless Steel Exterior Storage Bin and Scoop Preparing the Icemaker for Long StorageAir Filter CondenserDrain the potable water tank Remove the water from the potable water supply lineHoshizaki AMERICA, INC

KM-1800SAH/3, KM-1800SWH/3, KM-1800SRH/3 specifications

The Hoshizaki KM-1800 series offers three distinct models: the KM-1800SWH/3, KM-1800SAH/3, and KM-1800SRH/3. Each model is designed for high-capacity ice production, catering to the needs of various commercial settings, including restaurants, hotels, and bars. Renowned for their reliability and efficiency, Hoshizaki ice machines are built to provide consistent performance.

One of the main features of the KM-1800 series is its impressive ice production capacity. These models can produce up to 1,800 pounds of ice per day, making them ideal for high-demand environments. The KM-1800SWH/3 is designed with a built-in storage bin, while the KM-1800SAH/3 and KM-1800SRH/3 models have options for modular ice production, allowing for easy integration with existing storage systems. This flexibility helps businesses optimize their ice storage and production according to their specific needs.

The KM-1800 series utilizes advanced technologies to ensure the production of high-quality ice. Hoshizaki’s patented “Cycle Saving” technology reduces water waste and energy consumption, making these machines more environmentally friendly. Additionally, the units are equipped with an air-cooled condenser, which enhances efficiency by using ambient air to regulate temperatures. This feature is especially advantageous in warmer climates, where cooling can be challenging.

Durability is another defining characteristic of the Hoshizaki KM-1800 series. These machines are constructed with high-quality stainless steel, ensuring longevity and ease of cleaning. The interior is also designed for straightforward maintenance, minimizing downtime and reducing the total cost of ownership.

Another notable feature of the KM-1800 series is its self-diagnostic system, which allows users to troubleshoot issues quickly, reducing the risk of unexpected breakdowns. The clear display and easy-to-use control panel provide operators with essential real-time information, aiding in efficient management of ice production.

In conclusion, the Hoshizaki KM-1800SWH/3, KM-1800SAH/3, and KM-1800SRH/3 models stand out in the commercial ice machine market with their high capacity, advanced technologies, durable construction, and user-friendly design. These features make them a smart investment for any establishment that requires a reliable ice source, ensuring that businesses can serve their customers effectively.
Top Page Image Contents