Hoshizaki KM-1800SWH/3, KM-1800SRH/3, KM-1800SAH/3 instruction manual Final Checklist

Page 25

I. Final Checklist

1)Is the icemaker level?

2)Is the icemaker in a site where the ambient temperature is within +45°F to +100°F (+7°C to +38°C) all year around?

3)Is there at least a 12" clearance around the icemaker for maintenance or service?

4)Have all shipping tape(s), packing and cartons been removed from the icemaker? Are the cube guides in their correct position? Are the separators properly attached to their holding clips?

5)Are all components, fasteners and thumbscrews securely in place?

6)Have all electrical and piping connections been made?

7)Has the power supply voltage been checked or tested against the nameplate rating? Has the voltage tap switch in the three phase model unit been positioned to match incoming voltage? Has a proper ground been installed in the icemaker?

8)Are the water supply line shut-off valve and drain valve installed? Has the water supply pressure been checked to ensure a minimum of 10 PSIG and a maximum of 113 PSIG?

Note: The icemaker may stop running when the water supply is OFF, or if the pressure is below 10 PSIG. When the proper water pressure is reached, the icemaker automatically starts running again.

9)Have the compressor hold-down bolts and refrigerant lines been checked against vibration and possible failure?

10)Has the bin control switch been checked for correct operation? When the icemaker is running, hold an ice cube in contact with the bulb. The icemaker should stop within 6 to 10 seconds.

11)Has the end user been given the instruction manual, and instructed on how to operate the icemaker and the importance of the recommended periodic maintenance?

12)Has the end user been given the name and telephone number of an authorized service agent?

13)Has the warranty tag been filled out and forwarded to the factory for warranty registration?

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Superior Degree Reliability Issued Revised Hoshizaki AMERICA, INC Contents KM-1800SAH air-cooled Specifications Nameplate RatingKM-1800SAH3 air-cooled, 3 phase KM-1800SWH water-cooled KM-1800SWH3 water-cooled, 3 phase KM-1800SRH remote air-cooled KM-1800SRH3 remote air-cooled, 3 phase KM-1800SAH/3 Dimensions/ConnectionsKM-1800SWH/3 KM-1800SRH/3 See Fig How to Remove PanelsLocation SetupPage Installation of Second Unit Page KM-1800SHKM-1800SH3 Electrical ConnectionChecks Before Installation Installation of Remote Condenser UnitLocation Setup Stacking Condenser Unit Electrical ConnectionSee a, 14b and 14c Water Supply and Drain ConnectionsKM-1800SAH/3 KM-1800SWH/3 KM-1800SRH/3 Final Checklist Startup Cleaning Instructions III. Cleaning and Maintenance InstructionsCleaning Procedure Sanitizing Procedure Following Cleaning Procedure Maintenance InstructionsStainless Steel Exterior Storage Bin and Scoop Preparing the Icemaker for Long StorageAir Filter CondenserDrain the potable water tank Remove the water from the potable water supply lineHoshizaki AMERICA, INC

KM-1800SAH/3, KM-1800SWH/3, KM-1800SRH/3 specifications

The Hoshizaki KM-1800 series offers three distinct models: the KM-1800SWH/3, KM-1800SAH/3, and KM-1800SRH/3. Each model is designed for high-capacity ice production, catering to the needs of various commercial settings, including restaurants, hotels, and bars. Renowned for their reliability and efficiency, Hoshizaki ice machines are built to provide consistent performance.

One of the main features of the KM-1800 series is its impressive ice production capacity. These models can produce up to 1,800 pounds of ice per day, making them ideal for high-demand environments. The KM-1800SWH/3 is designed with a built-in storage bin, while the KM-1800SAH/3 and KM-1800SRH/3 models have options for modular ice production, allowing for easy integration with existing storage systems. This flexibility helps businesses optimize their ice storage and production according to their specific needs.

The KM-1800 series utilizes advanced technologies to ensure the production of high-quality ice. Hoshizaki’s patented “Cycle Saving” technology reduces water waste and energy consumption, making these machines more environmentally friendly. Additionally, the units are equipped with an air-cooled condenser, which enhances efficiency by using ambient air to regulate temperatures. This feature is especially advantageous in warmer climates, where cooling can be challenging.

Durability is another defining characteristic of the Hoshizaki KM-1800 series. These machines are constructed with high-quality stainless steel, ensuring longevity and ease of cleaning. The interior is also designed for straightforward maintenance, minimizing downtime and reducing the total cost of ownership.

Another notable feature of the KM-1800 series is its self-diagnostic system, which allows users to troubleshoot issues quickly, reducing the risk of unexpected breakdowns. The clear display and easy-to-use control panel provide operators with essential real-time information, aiding in efficient management of ice production.

In conclusion, the Hoshizaki KM-1800SWH/3, KM-1800SAH/3, and KM-1800SRH/3 models stand out in the commercial ice machine market with their high capacity, advanced technologies, durable construction, and user-friendly design. These features make them a smart investment for any establishment that requires a reliable ice source, ensuring that businesses can serve their customers effectively.
Top Page Image Contents