Hoshizaki KM-1800SWH/3, KM-1800SRH/3, KM-1800SAH/3 instruction manual Cleaning Procedure

Page 28

1.Cleaning Procedure

1)Dilute approximately 38 fl. oz. of recommended cleaner Hoshizaki "Scale Away" or "LIME-A-WAY," (Economics Laboratory, Inc.) with 7 gal. of water.

2)Remove all ice from the evaporator and the storage bin.

Note: To remove cubes on the evaporator, turn off the power supply and turn it on after 3 minutes. The defrost cycle starts and the cubes will be removed from the evaporator.

3)Turn off the power supply.

4)Remove the front panel, and then remove the insulation panel by first removing the thumbscrew, lifting up the panel slightly and pulling it towards you.

5)Remove the cap located on the front bottom part of the ice dropping hole. Drain the water tank. See Fig. 15.

6)Replace the cap in its correct position. Be careful not to cross thread it.

7)In bad or severe water conditions, clean the float switch assembly as described below. Otherwise, continue to step 8.

a.Remove the float switch assembly from the mounting bracket and remove the rubber boot from the bottom of the assembly.

b.Remove the retainer rod from the bottom of the float switch assembly, then remove the float. Be careful not to bend the retainer rod excessively when removing it.

c.Wipe down the float switch assembly's housing, shaft, float, and retainer rod with cleaning solution. Wipe the inside of the rubber boot with cleaning solution.

d.Reassemble the float switch assembly and replace it and the rubber boot in their correct positions.

8)Pour the cleaning solution into the water tank.

9)Fully open the cleaning valve on the left side wall of the machine compartment.

10)Move the control switch on the control box to the "WASH" position

11)Replace the insulation panel and the front panel in their correct positions.

12)Turn on the power supply, and start the washing process.

13)Turn off the power supply after 30 minutes.

14)Remove the front panel and the insulation panel.

15)Remove the cap located on the front bottom part of the ice dropping hole. Drain the water tank. Replace the cap and the insulation panel in their correct positions.

16)Move the control switch to the "ICE" position.

17)Close the cleaning valve.

18)Replace the front panel in its correct position.

19)Turn on the power supply to fill the water tank with water.

20)Turn off the power supply after 3 minutes.

21)Remove the front panel, and fully open the cleaning valve.

22)Move the control switch to the "WASH" position.

23)Replace the front panel in its correct position.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Superior Degree Reliability Issued Revised Hoshizaki AMERICA, INC Contents Specifications Nameplate Rating KM-1800SAH air-cooledKM-1800SAH3 air-cooled, 3 phase KM-1800SWH water-cooled KM-1800SWH3 water-cooled, 3 phase KM-1800SRH remote air-cooled KM-1800SRH3 remote air-cooled, 3 phase Dimensions/Connections KM-1800SAH/3KM-1800SWH/3 KM-1800SRH/3 How to Remove Panels See FigSetup LocationPage Installation of Second Unit Page Electrical Connection KM-1800SHKM-1800SH3Checks Before Installation Installation of Remote Condenser UnitLocation Setup Electrical Connection Stacking Condenser UnitWater Supply and Drain Connections See a, 14b and 14cKM-1800SAH/3 KM-1800SWH/3 KM-1800SRH/3 Final Checklist Startup III. Cleaning and Maintenance Instructions Cleaning InstructionsCleaning Procedure Sanitizing Procedure Following Cleaning Procedure Maintenance InstructionsStainless Steel Exterior Preparing the Icemaker for Long Storage Storage Bin and ScoopAir Filter CondenserRemove the water from the potable water supply line Drain the potable water tankHoshizaki AMERICA, INC

KM-1800SAH/3, KM-1800SWH/3, KM-1800SRH/3 specifications

The Hoshizaki KM-1800 series offers three distinct models: the KM-1800SWH/3, KM-1800SAH/3, and KM-1800SRH/3. Each model is designed for high-capacity ice production, catering to the needs of various commercial settings, including restaurants, hotels, and bars. Renowned for their reliability and efficiency, Hoshizaki ice machines are built to provide consistent performance.

One of the main features of the KM-1800 series is its impressive ice production capacity. These models can produce up to 1,800 pounds of ice per day, making them ideal for high-demand environments. The KM-1800SWH/3 is designed with a built-in storage bin, while the KM-1800SAH/3 and KM-1800SRH/3 models have options for modular ice production, allowing for easy integration with existing storage systems. This flexibility helps businesses optimize their ice storage and production according to their specific needs.

The KM-1800 series utilizes advanced technologies to ensure the production of high-quality ice. Hoshizaki’s patented “Cycle Saving” technology reduces water waste and energy consumption, making these machines more environmentally friendly. Additionally, the units are equipped with an air-cooled condenser, which enhances efficiency by using ambient air to regulate temperatures. This feature is especially advantageous in warmer climates, where cooling can be challenging.

Durability is another defining characteristic of the Hoshizaki KM-1800 series. These machines are constructed with high-quality stainless steel, ensuring longevity and ease of cleaning. The interior is also designed for straightforward maintenance, minimizing downtime and reducing the total cost of ownership.

Another notable feature of the KM-1800 series is its self-diagnostic system, which allows users to troubleshoot issues quickly, reducing the risk of unexpected breakdowns. The clear display and easy-to-use control panel provide operators with essential real-time information, aiding in efficient management of ice production.

In conclusion, the Hoshizaki KM-1800SWH/3, KM-1800SAH/3, and KM-1800SRH/3 models stand out in the commercial ice machine market with their high capacity, advanced technologies, durable construction, and user-friendly design. These features make them a smart investment for any establishment that requires a reliable ice source, ensuring that businesses can serve their customers effectively.
Top Page Image Contents